430HH Marshalltown Broom Concrete
Special Order Shipping
$315.21BROOM, CONCRETE
Showing 5321–5360 of 5429 resultsSorted by popularity
-
-
-
-
-
-
-
-
-
-
AB4013 Marshalltown Broom-float Adapter Bracket
Special Order Shipping
$139.99BROOM-FLOAT ADAPTER BRACKET
-
RED704433 Marshalltown Adapter Broom Extension Poly
Special Order Shipping
$4.01ADAPTER,BROOM EXTENSION,POLY
-
6516 Marshalltown Clevis Adapter Base Bracket
Special Order Shipping
$8.91CLEVIS ADAPTER BASE BRACKET
-
TSBRKT Marshalltown Threaded Broom/Darby Bracket
Special Order Shipping
$32.71THREADED BROOM/DARBY BRACKET
-
[50 Rolls] TW898 S Max 21ga Stainless Steel Tie Wire for MAX RB398 series
Special Order Shipping
$879.40TW898 S Max 21ga Stainless Steel Tie Wire for MAX RB398 series
-
TA238B/18-6 18ga Max Narrow Crown Stapler
Standard Shipping
$118.42The safety equipped MAX TA238B/18-16 is an extremely lightweight professional grade pneumatic narrow crown stapler. The TA238B/18-16 can be used for installing door and window casings, panel assembly and moldings, sub flooring, cabinet assembly, plywood decorative boards and other interior finish work, furniture assembly, case back fastening, and blind pinning. A depth adjustment dial allows…
-
TA116A/22-9 Max Fine Wire Stapler 1/2″ x 5/8″
Standard Shipping
$125.68The safety equipped TA116/22-9 from MAX is a 22 gauge pneumatic fine wire stapler to bring that creative finish on your decorative projects. With is ultra-lightweight handling at 2.2 lbs, you?ll find this tool is extremely easy to use in your hands when you?re stapling interior trim or furniture and cabinet assembly. The TA116A/21-13 is…
-
TA116A/21-13 Max Fine Wire Stapler 3/8″ x 5/8″
Standard Shipping
$125.68The TA116/21-13 from MAX is a 21 gauge safety equipped pneumatic fine wire stapler to bring that creative finish on your decorative projects. With is ultra-lightweight handling at 2.2 lbs, you?ll find this tool is extremely easy to use in your hands when you?re stapling interior trim or furniture and cabinet assembly. The TA116/21-13 is…
-
RB218 Max Rebar Tying Tool up to #3 x #3 with 21ga wire
Special Order Shipping
$2,288.71The RB218 is a battery operated rebar tying tool that can tie from mesh to #3 x #3 rebar. You will save time, save money and increase productivity with this handy cordless tool. MAX Re-Bar-Tiers are also proven to reduce the risk of developing musculoskeletal diseases.
-
NF665A/15 Max 15ga Angled Finish Nailer
Free Shipping
$183.74Whether the job calls for fastening cabinets in a tight corner or installing wood paneling to a pitched ceiling, this safety equipped, angled 15ga finish nailer from the SuperFinisher line is ideal for angled applications that might be out of reach. With a 100 round magazine capacity and an angled body, the NF665A/15 15ga angled…
-
NF565A/16 Max 16ga Straight Finish Nailer
Standard Shipping
$176.48With a 100 round magazine capacity and a slim body, this safety equipped professional 16ga pneumatic finish nailer is providing carpenters with the reliability they?ve come to know with the SuperFinisher line. When it comes to decorative applications such as panel assembly, crown moldings and various wood casings, the NF565A/16 is the straight finish nailer…
-
NF255FA/18 Max 18ga Brad Nailer to 2-1/8″
Standard Shipping
$103.90Weighing only 2.7 lbs., this safety equipped precise 18ga brad nailer from the SuperFinisher series is the ideal tool for blind pinning, panel assembly, fastening door and wood casing and more for perfecting that finishing touch. The NF255FA/18 is designed with a switchable firing mechanism that allows carpenters to easily switch between contact fire and…
-
CN890F2 Max Coil Framing Nailer
Free Shipping
$358.85Amongst the most safety equipped, lightweight and compact coil nailers in its class, The SuperFramer is only 7.7 lbs which helps to prevent arm fatigue during continuous use. Designed with an anti-double fire trigger, aids in minimizing accidental injury of 2nd shots to end users. The SuperFramer, pneumatic nailer, drives 15-degree wire collated coil nails…
-
CN665D Max Coil Decking Nailer
Free Shipping
$441.79With a large capacity magazine of 300 nails and a maximum fastener size of 2 x .131, the safety equipped CN665D SuperDecking tool is ideal for sheathing, subflooring, roof decking, exterior deck, siding, fencing, exterior trim, furring, and strapping jobs. With an integrated rapid-fire trigger which enables high-speed fastening, carpenters can quickly finish their installations,…
-
Tilt Up Lift Inserts
- Fewer Inserts required
- Up to 70% less crane time
- Lower installation and erection cost
-
Tilt Up Profiles
- Saw Cut Cover
- Single Chamfer
- Double-Chamfer
-
Tilt Up Pipe Braces
- Adjustable Pipe Braces have a telescoping pipe for rough dimension and a 6” threaded.
- Fixed Pipe Braces are a standard length with an 18” threaded connecting shoe for final adjustment and anchoring.
- The Heavy-Duty Fixed Pipe Brace is a larger diameter pipe that provides greater capacity with an 18” threaded connecting shoe.
-
Tilt Up Slant Anchor
Slant Anchor Installation Guidelines:
- Position and secure the Slant Anchor before casting panel.
- Erect panel, brace and install bearing grout as required.
- Locate and remove foam Void Former from connection face.
- Drill 1” diameter hole into the foundation using the sleeve as a guide.
- Remove dust from hole using compressed air, vacuum and/or bottle brush.
- Mix Flowable Grout and pour into the connection cavity until half full.
- Place Ductile Bar into sleeve and foundation immediately after grouting.
- Add additional grout to cover the bar and fill the cavity.
- Allow grout to cure before patching/finishing the panel face.
-
Tilt Up Ring Clutch
Connecting:
- User must conduct a visual inspection to detect any possible damage or defects in the Lifter before use.
- The ring-shape of the Lifter hooks onto the loop of the insert for lifting.
- Move the handle to “open” the Lifter ring, position the Lifter over the insert and move the handle to “close”the ring.
-
Tilt Up Helical Ground Anchor (HGA) Bracket
- 1-Bolt
- 2-Bolt
- 3-Bolt
-
Tilt Up Helical Ground Anchor
Helical Ground Anchors are both economical and effective:
- Eliminates forming and handling a concrete deadman at each brace location.
- Eliminates drilling, bolting and patching the floor slab at each brace location.
- Torque installation method produces a verifiable load rating in all soil conditions.
- Provides a quick installation and removal method for anchor placement.
- Compatible with Helical Anchor Extensions, HGA Brackets and Pipe Braces.
-
Tilt Up Brace Inserts
- Wire legs welded to a coil insert
- Disposable plastic plug
-
#5 PINKBAR Fiberglas Rebar 20ft lengths
Quote Request - Shipping Calculated Later
$0.00Features:
- Less Weight. Less Install Time. Fewer Truckloads.
- Less Overall Cost
- 2x stronger in tensile strength compared to the same size diameter of grade 60 steel
- More Durability
- Up to 7x LIGHTER than steel
Select Options This product has multiple variants. The options may be chosen on the product page -
#4 PINKBAR Fiberglas Rebar 20ft lengths
Quote Request - Shipping Calculated Later
$0.00Features:
- Less Weight. Less Install Time. Fewer Truckloads.
- Less Overall Cost
- 2x stronger in tensile strength compared to the same size diameter of grade 60 steel
- More Durability
- Up to 7x LIGHTER than steel
Select Options This product has multiple variants. The options may be chosen on the product page -
#3 PINKBAR Fiberglas Rebar 20ft lengths
Quote Request - Shipping Calculated Later
$0.00Features:
- Less Weight. Less Install Time. Fewer Truckloads.
- Less Overall Cost
- 2x stronger in tensile strength compared to the same size diameter of grade 60 steel
- More Durability
- Up to 7x LIGHTER than steel
Select Options This product has multiple variants. The options may be chosen on the product page -
#2 PINKBAR Fiberglas Rebar 20ft lengths
Quote Request - Shipping Calculated Later
$0.00Features:
- Less Weight. Less Install Time. Fewer Truckloads.
- Less Overall Cost
- 2x stronger in tensile strength compared to the same size diameter of grade 60 steel
- More Durability
- Up to 7x LIGHTER than steel
Select Options This product has multiple variants. The options may be chosen on the product page -
RB655 MAX TwinTier 16 Gauge Rebar Tying Tool
$3,299.00OBSOLETE ITEM DISCONTINUED BY MAX – NO STOCK AVAILABLE
Features:
- Uses 16 gauge rebar tie wire TW1525, TW1525-EG, TW1525-PC
- The large jaw enables the TwinTier to tie up to a #7 x #7 rebar.
- One charge of the long lasting battery can tie up to 4 coils.
-
RB441T BARE TOOL TwinTier MAX Rebar Tying Tool No Battery
Special Order Shipping
$2,502.30SPECIAL ORDER ONLY – WE DO NOT STOCK THIS BARE TOOL
Features:
- A Dual Wire Feeding Mechanism increases productivity.
- The Wire Pull-Back Mechanism dispenses the precise amount of wire needed to form a tie, reducing wire usage.
- The Wire Bending Mechanism produces a shorter tie height. Less concrete is needed to fully cover a wire tie.
- The large jaw enables the TwinTier to tie up to a #7 x #7 rebar.
- One charge of the battery can yield up to 4,000 ties.
- Greater protection against debris and moisture entering the tool.
- Effortlessly open gears to quickly feed wire when loading the tool.
- Rapidly load the dual wire coil with the quick load magazine design.
-
[50 Rolls] MAX TW898-USA 21 Gauge Rebar Tie Wire made from Buy America Steel
Free Shipping
$357.11Features
- Wire steel is melted, annealed and drawn in the U.S.A
- Steel mill certification available
- For use with MAX RB397, RB398, RB517 and RB518
-
[50 Rolls] MAX TW898-EG Electro Galvanized 21 Gauge Rebar Tie Wire
Special Order Shipping
$349.61Features
- 21 Gauge Electro Galvanized Steel Tie Wire
- Excellent resistance to corrosion and rust
- For use with MAX RB397, RB398, RB517 and RB518
-
[30 Rolls] TW1061T-S | MAX Stainless Steel 19Ga Rebar Tie Wire
Free Shipping
$897.60Features:
- Stainless Steel Wire Resists Rust and Corrosion
- Use with stainless steel rebar
- 19 Gauge Rebar Tie Wire
- For use with MAX RB441T TwinTier and RB401T-E TwinTier
