Showing all 40 resultsSorted by popularity
-
SALEÂ 34% OFF
Standard Shipping
$10.99 Original price was: $10.99.$7.29Current price is: $7.29.
Features:
- 10 PACK – 10 Blades per unit
- Up to 70% faster cutting compared to standard blades
- High grade Tungsten carbide tips for durability
- Blade coating provides reduced pitch build-up
- Reduced swing width
- Top bevel angle with 23° tip for a smoother cut
Minimum order quantity: 10
Order in multiples of: 10
-
Standard Shipping
$87.26
Features
- Tested in accordance with ACI 355.2 and AC193
- Qualified for static, wind and seismic loading conditions
- Available in 1/2″ and 5/8″ diameters
- Standard fractional sizes — the hole size matches the anchor size
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- For added convenience, a 1/2″ socket adapter and (2) T-drive bits are included in each box
- Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
- Washer head allows screw anchor applications incompatible with a hex head
-
Standard Shipping
$7.99
Features:
- Market leading cutting speed now with an advanced aluminum oxide blend adds more cutting points per unit area
- Up to twice the life and aggressive feel with a new active tough bond technology
- Three layers of reinforcement for heavy duty tough applications and high power machines
- Available in a versatile universal arbor for 1 in and 20 mm arbor machines and in a 20 mm fixed arbor option
-
Standard Shipping
$46.99
Features
- Includes 8 most common size sockets & 2-1/4″ adapter
- Pivoting organization pins allow for customized application based storage
- Space inside the case allows for storage of a common 10″ hand wrench (not included)
- Made of high impact resistant material to give overall durability to the case
- Small Footprint & Easy to Carry
-
Free Shipping
$208.99
Features
- High-Density Polyethylene (HDPE) shell with a full brim providing additional protection against sun, glare, rain and falling debris
- Extended back brim helps protect neck and ears from the sun’s UV rays, as well as a run-off for rain and snow…short front brim shades the face while allowing excellent visibility
- Brim includes finger grips on front and rear, as well as a textured underside to reduce reflection/glare
- 6-Point suspension system with polyester textile straps offers unrivaled comfort without compromising performance
- Unique “3D Adjustment” provides a precise fit using harness depth settings…unlike any other hard hat on the US market today
-
Free Shipping
$208.99
Features
- High-Density Polyethylene (HDPE) shell with a full brim providing additional protection against sun, glare, rain and falling debris
- Extended back brim helps protect neck and ears from the sun’s UV rays, as well as a run-off for rain and snow…short front brim shades the face while allowing excellent visibility
- Brim includes finger grips on front and rear, as well as a textured underside to reduce reflection/glare
- 6-Point suspension system with polyester textile straps offers unrivaled comfort without compromising performance
- Unique “3D Adjustment” provides a precise fit using harness depth settings…unlike any other hard hat on the US market today
-
Standard Shipping
$165.99
Features
- High-Density Polyethylene (HDPE) shell designed with five raised channels running across the top for strength, and an extended back area for extra protection
- 6-Point polyester textile suspension system offers unrivaled comfort without compromising performance
- Unique “3D Adjustment” provides a precise fit using harness depth settings unlike any other hard hat on the US market today
- Revolution Wheel Ratchet is easy to use and creates a firm comfortable fit
- Vented to reduce inside helmet temperatures
-
Standard Shipping
$165.99
Features
- High-Density Polyethylene (HDPE) shell designed with five raised channels running across the top for strength, and an extended back area for extra protection
- 6-Point polyester textile suspension system offers unrivaled comfort without compromising performance
- Unique “3D Adjustment” provides a precise fit using harness depth settings unlike any other hard hat on the US market today
- Revolution Wheel Ratchet is easy to use and creates a firm comfortable fit
- Chamlon sweatband
-
Free Shipping
$1,414.99
Features
- Meets: ASTM F2733, F1891; ATPV 16 CAL; CAT 2; Type R, Class E
- 23237-12-1-LIM features 69% Cotton, 31% Polyurethane
- Front snap fly
- Adjustable hook and loop closure at the cuff
- Flexible segmented FR tape
-
Free Shipping
$1,771.99
Features
- 23237-00-1-LIM features 69% Cotton, 31% Polyurethane
- Zipper front closure with hook and loop storm flap
- Flexible segmented FR tape
- Right chest mic tab
- Meets: ASTM F2733, F1891; ATPV 16 CAL; CAT 2; Type R, Class 3
-
Standard Shipping
$106.62
Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
Standard Shipping
$120.00
Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
Standard Shipping
$151.23
Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
Standard Shipping
$49.43
Features
- Tested in accordance with ACI 355.2 and AC193
- Qualified for static, wind and seismic loading conditions
- Available in 1/2″ and 5/8″ diameters
- Standard fractional sizes — the hole size matches the anchor size
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- For added convenience, a 1/2″ socket adapter and (2) T-drive bits are included in each box
- Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
- Washer head allows screw anchor applications incompatible with a hex head
-
Standard Shipping
$63.19
Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
Standard Shipping
$83.08
Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Standard fractional sizes, hole size same as anchor size
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
- 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
- Countersunk head allows screw anchor applications incompatible with a hex head
- Available in 1/4″ and 3/8″ diameters
-
Standard Shipping
$177.69
Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
Standard Shipping
$118.46
Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
Standard Shipping
$121.08
Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
Standard Shipping
$133.23
Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
Standard Shipping
$37.23
Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
Standard Shipping
$74.46
Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
Standard Shipping
$93.23
Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
Standard Shipping
$140.24
Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
Standard Shipping
$184.77
Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
Standard Shipping
$42.77
Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
Standard Shipping
$43.00
Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
Standard Shipping
$105.69
Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
Standard Shipping
$41.85
Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
Special Order Shipping
$9.99
Minimum order quantity: 10
Order in multiples of: 10
-
Special Order Shipping
$12.99
Features:
- Sharp silicon carbide abrasive provides fast aggressive cutting action
- Versatile; stiff enough to provide aggressive removal, yet soft enough to prevent gouging and rework
- Open web construction design provides a cooler grinding/stripping action as a more robust option to wire brushes
- Extra coarse grit for removing parting lines and rust, and stripping coatings on aluminum, cast iron, concrete, fiberglass, composites, carbon steels, masonry, and natural stone
Minimum order quantity: 10
Order in multiples of: 10
-
Special Order Shipping
$6.99
Features:
- Sharp coarse grit silicon carbide grain for asphalt, green concrete, asphalt over concrete, abrasive blocks, mortar and other abrasive materials
- Constructed with two full layers of reinforcing for lower-power machines, and light to medium applications where speed of cut is a primary selection criterion
- Patented Universal Arbor will allow a single blade to be run on saws with either 1 in. or 20mm arbors
- A good mix of value and consistent performance when initial price is another primary purchasing consideration
Minimum order quantity: 10
Order in multiples of: 10
-
Special Order Shipping
$6.99
Features:
- Market leading cutting speed now with an advanced aluminum oxide blend with more cutting points per unit area
- Up to twice the life and aggressive feel with a new active tough bond technology
- Versatile choice for cutting rebar, structural steel, pipe and sheet metal including hard and soft carbon steel and 400 series stainless
- First to market universal arbor allows a single blade to be run on saws with a 1 in. or 20mm arbor
Minimum order quantity: 10
Order in multiples of: 10
-
Special Order Shipping
$4.99
Features:
- Market leading cutting speed now with an advanced aluminum oxide blend with more cutting points per unit area
- Up to twice the life and aggressive feel with a new active tough bond technology
- Versatile choice for cutting rebar, structural steel, pipe and sheet metal including hard and soft carbon steel and 400 series stainless
- First to market universal arbor allows a single blade to be run on saws with a 1 in. or 20mm arbor
Minimum order quantity: 10
Order in multiples of: 10
-
Special Order Shipping
$2.99
Features:
- Sharp silicon carbide grain for penetration of very hard, non-metallic materials
- 1/4 inch thick depressed center wheel designed to be used at a 30 degree angle on a right angle grinder for offhand stock removal, smoothing welds ,and beveling on the bottom/face of the wheel
- Our ideal blend of wheel strength and smooth bond provide a good mix of cut rate and life
- Low initial price point is ideal for end user unable to measure performance
Minimum order quantity: 10
Order in multiples of: 10
-
Special Order Shipping
$14.99
Features:
- Sharp silicon carbide abrasive provides fast aggressive cutting action
- Open web construction for minimal loading; great alternative to wire brushes
- Advanced resin bond prevents shedding, snagging, gouging, and rework
- Extra coarse grit for removing parting lines and rust, and stripping coatings on aluminum, cast iron, concrete, fiberglass, composites, carbon steels, masonry, and natural stone
Minimum order quantity: 10
Order in multiples of: 10
-
Special Order Shipping
$5.99
Features:
- New advanced aluminum oxide grain blend with more cutting points per unit area increasing cutting speed by 50 percent
- Up to twice the life and aggressive feel with a new active tough bond technology
- Versatile choice for cutting rebar, structural steel, pipe and sheet metal including hard and soft carbon steel and 400 series stainless
- First to market universal arbor allows a single blade to be run on saws with a 1 in. or 20mm arbor
Minimum order quantity: 10
Order in multiples of: 10
-
Special Order Shipping
$2.99
Features:
- Sharp coarse silicon carbide abrasive blend for fast cutting and long life on l masonry materials such as concrete, brick and asphalt circular saw applications
- Constructed with full fiberglass reinforcing for strength and stable cutting action
- DM (Diamond Mount) pop-out and 5/8 inch center hole combination to fit all popular circular saws
- A good mix of value and consistent performance for general purpose circular saw applications when initial price is a primary purchasing consideration
Minimum order quantity: 25
Order in multiples of: 25
-
Special Order Shipping
$5.72
3in ALUMINUM LINE LEVEL
Minimum order quantity: 10
Order in multiples of: 10
-
Special Order Shipping
$8.19
ROCK-N-ROLLER AXLE FOR 8in FRAME
