Showing 1–40 of 263 resultsSorted by popularity
-
-
Dewalt DW8424 Z 4-1/2in X .045in X 7/8in Thin Cutting Wheel Type 27 Depressed Center Wheel
$2.09Features
- More Cuts. Fewer Wheels.TM
- 50% Longer Life, Replace less often with Temper Point grains that are tougher and razor sharp. Better adhesion between the coated grains and resin creates a longer lasting cutting edge that wears
- Extremely Versatile: Efficiently cut a wide range of metals including carbon steel, stainless and nickel-based alloys.
- Aggressive Cutting Action: Make fast cuts with a thin wheel design and high-grain concentration.
- Durable By DesignTM: Built with two sheets of fiberglass for wheel strength. Designed to reduce wheel breakage.
-
B-69727 7 Diamond Blade Turbo General Purpose
$33.99Features
- 50% taller (13mm) segments are designed for longer life and faster cutting
- Up to 4x longer life than competitive blades
- Optimum bond matrix provides a faster, longer lasting, and smoother cutting
- Up to 30% smoother cutting than segmented blades
- Carefully tensioned for less vibration and a superior user experience
- Strict quality control measures ensure superior performance
- Dry or wet cutting for added versatility
-
Diablo DMAPL4040 SDS-Plus 4-Cutter 3/16x4x6 Rebar Demon Full Carbide Head Hammer Bit
$5.49Features:
- Diablo Rebar Demon™ SDS-Plus 4-Cutter Full Carbide Head Hammer Bit
- Diablo made Dura-Carbide™ withstands impact and high heat applications, dramatically extending life versus standard hammer bits
- Precision Tip delivers stability and accuracy required for fast, precise holes
- Tri-Metal Diffusion Bonding provides heat resistance and prevents breakage of the full-carbide heat for maximum life and productivity
-
10% OFF
Simpson Strong-Tie BCS2-3/6Z BCS ZMAX Galvanized Post Cap W/ Double-Shear Nailing for Triple 2x Beam, 6x Post
Original price was: $15.99.$14.39Current price is: $14.39.Features
- BCS2-3/6Z BCS opposing flanges provide increased lateral resistance
- Double-shear nailing for optimal strength
- Sized specifically for multi-2x widths
-
Norton Clipper 14 In. x 0.125 In. x 1 In.-20 mm 4X4 Max Cut iHD Segmented High-Speed Blade
Features:
- Norton Clipper features premium iHD technology allows better cutting and consistency, increasing blade life
- Anti-crack ellipsoidal gullets resists cracking of steel core under extreme conditions
- Stroboscopic indicators eliminate overcutting and allow faster cooling of blade
- Segment wear indicators show remaining blade life
-
[Roll] MAX TW898-roll Regular 21 Gauge Rebar Tie Wire for RB397 RB398 RB517 and RB518 rebar tiers only
$8.99Features
- 21 Gauge Steel Tie Wire
- Bare steel with no coating
- For use with MAX RB397, RB398, RB517 and RB518
-
Norton 14 In. x .125 In. x 1 In.-20 mm Clipper Multi-Cut Segmented High-Speed Blade
$110.99Features:
- Has a .472 inch impregnated diamond segment for longer life, smoother finish and faster cutting
- Alternating turbo segment for cut speed, and plain segment for life
- Ventilated steel center with cooling holes to reduce heat when cutting
- Laser cut dual arbor for consistent fit on high-speed, masonry, and walk-behind saws
-
B-69618 5in Diamond Blade Segmented General Purpose
$13.60Features
- For use with angle grinders
- Made with high quality diamonds
- For smoother and finer cuts in masonry products
- Dry or wet cutting for added versatility
- Up to 40% faster cutting than turbo blades
- Optimum bond matrix provides a faster, longer lasting, and smoother cutting
- 50% taller (13mm) segments are designed for longer life and faster cutting
-
B-69711 5in Diamond Blade Turbo General Purpose
$14.20Features
- 50% taller (13mm) segments are designed for longer life and faster cutting
- Up to 4x longer life than competitive blades
- Optimum bond matrix provides a faster, longer lasting, and smoother cutting
- Up to 30% smoother cutting than segmented blades
- Carefully tensioned for less vibration and a superior user experience
- Made with high quality diamonds
- Dry or wet cutting for added versatility
-
B-69696 4‑1/2in Diamond Blade Turbo General Purpose
$11.60Features
- Optimum bond matrix provides a faster, longer lasting, and smoother cutting
- Dry or wet cutting for added versatility
- Carefully tensioned for less vibration and a superior user experience
- Made with high quality diamonds
- 50% taller (13mm) segments are designed for longer life and faster cutting
- Strict quality control measures ensure superior performance
- For smoother and finer cuts in masonry products
-
Norton 16 In. x .125 In. x 1 In.-20 mm Clipper Multi-Cut Segmented High-Speed Blade Medium
$174.99Features:
- Has a .472 inch impregnated diamond segment for longer life, smoother finish and faster cutting
- Alternating turbo segment for cut speed, and plain segment for life
- Ventilated steel center with cooling holes to reduce heat when cutting
- Laser cut dual arbor for consistent fit on high-speed, masonry, and walk-behind saws
-
Tsurumi XHD2QC50 Quick Connect Discharge Hose, 2” x 50′
$91.99Features
- XHD2QC50 offers a durable lay-flat design
- High-quality PVC construction
- 50-Ft assembly length
- 80 PSI working pressure
-
Simpson Strong-Tie CC5 1/4-6 CC Column Cap for 5-1/8 in. Beam, 6x Post
$124.29Features
- CC5 1/4-6 is rigorously tested for high-strength welds
- Seismic rated
- Code-compliant
- Temporary fastening
-
![TW1061T-PC-[Roll]](https://www.heydensupply.com/wp-content/uploads/2021/01/max-tw1061t-pc-poly-coated-tie-wire-1.jpg)
TW1061T-PC single roll MAX Poly Coated 19Ga Steel Rebar Tie Wire
$22.99Features:
- Poly Coated Wire Resists Rust and Corrosion
- Use with epoxy coated rebar
- 19 Guage Rebar Tie Wire
- For use with MAX TwinTier Rebar Tying Tools
-
Simpson Strong-Tie ETIPAC2G10 Crack-Pac 2G Single Epoxy Injection Tube, 9 OZ
$61.99Features
- ETIPAC2G10 dispenses with a standard caulking tool
- Seals out moisture, protecting rebar in the concrete from corrosion and flooring from moisture damage
- Meets the requirements of AASHTO M-235 and ASTM C881, Type I, Grade 1, Class C
Freeze-thaw resistant
-
E-02515 9in Diamond Blade Segmented General Purpose
$45.79Features
- Taller 13mm segments are designed for longer life and faster cutting
- Up to 4x longer life than competitive blades
- For cutting concrete, block, brick, pavers, and roof tiles
- Optimum bond matrix provides a faster, longer lasting, and smoother cutting diamond blade
- Made with high quality diamonds
- For smoother and finer cuts in masonry products
- For use with angle grinders or masonry saws
-
H8D High Speed Diamond Blade 14-inch for General Purpose Concrete Cutting
$55.35Features
- Quality diamond blade with economical cutting value
- Sintered blade segment
- Diamond depth of .440” (11mm)
- Segment height of .540” (14mm)
-
4% OFF
BL1850B 18V LXT Lithium-Ion 5.0 Ah Battery with Charge Indicator
Original price was: $152.50.$146.40Current price is: $146.40.Features
- Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
- Provides up to 65% more run time per charge compared to BL1830
- Reaches full charge in 45 minutes or less
- Compatible only with STAR Protection tools, indicated by the Star symbol™ and/or yellow battery receiver under the tool
-
DEWALT DWF83PT 30 Degree Paper Tape Collated Framing Nailer, Pneumatic, Bump/Sequential
$235.99Features:
- Industrial-grade design for high-speed, high-volume framing
- Lightweight with ergonomic balance for comfort and control
- Recoil-dampening engine system helps minimize recoil
- Supports 30° paper tape clipped and full round head nails
- Selectable bump and sequential firing modes
-
Bosch GBL18V-450N PROFACTOR 18V Blower, 459 CFM, 123 MPH, Tool Only
$219.00Features:
- PROFACTOR performance delivers corded-like power in a cordless 18V blower.
- BITURBO Brushless Technology with axial fan exceeds 450 CFM and reaches 123 MPH.
- Air speed control wheel with multiple settings for power, noise, and runtime.
- Trigger lock-on keeps blower on while allowing speed adjustments.
- Low noise operation at 64 dB and ergonomic, lightweight 6.6 lb design.
- Easy assembly twist-and-click nozzle and hanger slot for storage.
-
High Speed Diamond Blade 14-inch for General Purpose Concrete Cutting
$55.35Features
- Quality diamond blade with economical cutting value
- Sintered blade segment
- Diamond depth of .440” (11mm)
- Segment height of .540” (14mm)
-
Simpson Strong-Tie FB24Z FB ZMAX Galvanized Fence Rail Bracket for 2×4
$0.79Features
- Preinstallation of brackets allows rails to slide into place easily
- FB24Z eliminates need for toe nails or screws
-
Bosch HC4C2146 SDS-plus Bulldog Tough Rotary Hammer Bit, 7/8 in x 10 in, 8 in Working Length
$38.98Features:
- Four-cutter carbide-tipped head for hitting rebar and reducing bit lock-up
- Delivers up to 2X life in concrete with rebar vs. 2-cutter bits
- Four-flute design efficiently removes dust from the hole
- SDS-plus shank for use with SDS-plus rotary hammers
-
B-69593 4‑1/2in Diamond Blade Segmented General Purpose
$22.90Features
- feat1
- 50% taller (13mm) segments are designed for longer life and faster cutting
- For cutting concrete, block, brick, and pavers
- Optimum bond matrix provides a faster, longer lasting, and smoother cutting
- Up to 40% faster cutting than turbo blade
- Carefully tensioned for less vibration and a superior user experience
- For use with angle grinders
- Dry or wet cutting for added versatility
-
34% OFF
Diablo DMADST0600 6 in. Diamond Segmented Turbo Cut-Off Discs for Masonry
Features
- Diamond segment SPEED-Edge slot design reduces vibration, providing high cutting speeds that deliver up to 30% faster cuts than standard segmented diamond discs
- 60% taller segments containing superior quality diamonds along with an ultra-durable bond to the disc body for up to 4x longer life
- Hardened disc body absorbs vibration and increases impact resistance to deliver superior quality cuts in hardened materials
-
Norton CTC705 Clipper 7 In. Electric 1HP 115V 60Hz Tabletop Tile Saw
$1,295.90Features:
- Strong belt-driven 1HP motor provides powerful and precise cutting
- Light-weight conveyor provides a smooth slide creating straight cuts and has a locking mechanism for easier transportation
- High intake and output to keep fresh water in pan with a durable filter to keep debris out
- Aluminum cutting table is equipped with anti-skid top for keeping material in place while cutting
-
Norton CP514-350i Clipper 14 In. 2 Cycle C/O Saw
$1,383.99Features:
- Patented twin-air inlets and external rocker wheel keeps saw running clean and reduces debris being trapped in the filter
- The four-step easy start eliminates the hassle of a choke by simply turning the switch on, priming the engine, pushing the decompression button, then pulling the cord to start
- The electronic carburetor?s electromagnetic valve eliminates the standard choke and half throttle start
- The patented iLube option automatically controls mixing of oil and fuel for maximum efficiency
-
Norton 12 x 0.475 In. Clipper Charger Segmented Rim Core Bit
$624.99Features:
- Excellent blend of performance and price
- Laser welded segments for faster penetration
- Most aggressive drilling action for general-purpose and masonry applications
- 16 in. tube length to produce a 13 in. coring depth
-
New Product
MARSHALLTOWN WTLB60 White Lightning Bull Float, 60 in x 8 in, Low-Friction Polymer Blade
Features:
- White Lightning technology floats faster and easier for smoother results
- Low-friction polymer blade is lightweight, durable, impact-resistant
- Rounded edges glide without gouging the surface
- C-Channel strengthens the blade; adapter fits two- or four-hole brackets
- Attaches to standard bull float brackets and extension handles (sold separately)
- Made in the USA with Global Materials
-
New Product
MARSHALLTOWN WTLB48 White Lightning Bull Float Blade, 48 in x 8 in
Features:
- White Lightning technology for faster, easier floating and smoother results
- Low-friction polymer blade is lightweight, durable, impact-resistant
- Rounded edges glide without gouging concrete
- C-Channel strengthens the blade
- Adapter fits two-hole or four-hole bull float brackets; use with extension handles (sold separately)
- Made in the USA with Global Materials
-
New Product
MARSHALLTOWN SWSBLADE12 Power Screed Board for Shockwave and Speed Striker, 12 ft
Features:
- L-shaped design for wet and form-to-form screeding
- Curled edges roll concrete forward to level highs and fill lows
- Durable aluminum alloy withstands prolonged vibration
- 12 ft board fits Shockwave and Speed Striker (not 2.0 versions)
- Made in USA with Global Materials
-
New Product
MARSHALLTOWN SWSBLADE10 Power Screed Board for Shockwave and Speed Striker, 10 ft, Aluminum
Features:
- L-shaped board ideal for wet and form-to-form screeding
- Curled edges roll concrete forward to level highs and fill lows
- Durable aluminum alloy withstands prolonged vibration
- 10 ft board size; fits Shockwave and Speed Striker screeds
- Made in the USA with global materials
- Not compatible with Shockwave 2.0 or Speed Striker 2.0
-
New Product
MARSHALLTOWN SW200H Shockwave 2.0 Power Screed with Honda GX35 Engine
Features:
- Unique protective frame for engine safety and easy transport
- Excellent vibration dampening to reduce operator fatigue
- Onboard tachometer/hour meter for maintenance scheduling
- Industry-standard 9" blade attachment hole spacing
- Bolt-on kickstand keeps unit upright when not in use
- Honda GX35 4-stroke engine
- Screed boards sold separately
- Made in USA with global materials
-
New Product
MARSHALLTOWN 32411 Power Screed Board, Shockwave 2.0, 9 in Hole Spacing, 16 ft
Features:
- Shockwave 2.0 board with 9″ hole spacing fits competitor models
- L-shaped design ideal for wet and form-to-form screeding
- Curled edges push concrete forward to level highs and fill lows
- Durable aluminum alloy withstands prolonged vibration
- 16 ft length; option for one- or two-hole mounting on 16′ board
- Made in the USA with Global Materials
-
New Product
MARSHALLTOWN 32409 Shockwave 2.0 Power Screed Board, 9″ Hole Spacing, 14 ft
Features:
- 9″ hole spacing fits competitor models
- L-shaped design ideal for wet and form-to-form screeding
- Curled edges roll concrete forward to level highs and fill lows
- Durable aluminum alloy withstands prolonged vibration
- Made in USA with Global Materials
-
New Product
MARSHALLTOWN 32408 Power Screed Board, Shockwave 2.0, 9 in Hole Spacing, 12 ft
Features:
- 9″ hole spacing fits competitor models
- L-shaped design ideal for wet and form-to-form screeding
- Curled edges move concrete forward to level highs and fill lows
- Durable aluminum alloy withstands prolonged vibration
- Available in multiple sizes; 12 ft board
- Made in the USA with Global Materials
-
New Product
MARSHALLTOWN 32407 Power Screed Board, Shockwave 2.0, 9 in Hole Spacing, 10 ft
Features:
- 9″ hole spacing fits competitor models
- L-shaped design ideal for wet and form-to-form screeding
- Curled edges roll concrete forward to level highs and fill lows
- Durable aluminum alloy withstands prolonged vibration
- Available in multiple sizes; 10 ft board
- Not compatible with Shockwave 1.0 or Speed Striker 1.0
- Made in the USA with Global Materials
-
New Product
MARSHALLTOWN WTLB36 White Lightning Bull Float Blade, 36 in x 8 in
Features:
- White Lightning technology for faster, smoother floating
- Low-friction polymer blade is lightweight, durable, impact-resistant
- Rounded edges reduce gouging on concrete
- C-Channel strengthens blade; easy-to-clean, non-absorbing material
- Mounting adapter fits two-hole or four-hole brackets; use with extension handles (sold separately)
- Made in the USA with Global Materials
-
WEATHER GUARD 9133-3-01 Accessory Shelf, 36 in W x 13 in D, Steel, White
Features:
- Accessory shelf for van shelving systems
- 36 in wide x 13 in deep; fits 36×13 units or top shelf of 36×16 units
- Heavy-gauge steel, fully hemmed for strength and durability
- Brite White ARMOR TUF Powder Coat finish
- Includes four adjustable dividers
