Showing 121–160 of 198 results
-
![](https://www.heydensupply.com/wp-content/uploads/2023/02/07-KA745-UP-600x600.jpg)
Special Order Shipping
$50.79
Features:
- Seamless knit construction provides comfort without sacrificing dexterity
- Prioprietary ACP Technology and Kevlar? blended shell provides excellent protection against heat, cuts, lacerations and abrasions
- Heat resistance protects the hand from minor heat and burn injuries up to 350?-?F, Do not use near open flame
- Polyester lining is ultra soft and very lightweight
- Knit Wrist helps prevent dirt and debris from entering the glove
- 100% Silicone Free
- Color coded hems for easy size identification
- Launderable for extended life and to reduce replacement costs
-
![XJP03Z](https://www.heydensupply.com/wp-content/uploads/2023/02/9ec86e21-f026-469f-ae4e-358c8d92889f_xjp03z_p_1500px-600x600.jpg)
![](https://www.heydensupply.com/wp-content/uploads/2023/02/5888624c-f8e2-4665-985e-268e4d1c250d_xjp03z_b_1500px-600x600.jpg)
Free Shipping
$298.75
Features
- Rack-and-pinion vertical fence system engineered for accurate fence adjustments
- Cast aluminum pivot fence with three positive stops at 0°, 45° and 90°, and easy centering on 3/4″ material
- Six depth settings with one-touch stops for #0, #10, and #20 and most common biscuits sizes
- Cordless plate joiner provides portability and performance in the field or in the shop without the cord
- Large and easy-to-operate cam locks for angle guide and fence adjustments
-
![PJ7000](https://www.heydensupply.com/wp-content/uploads/2023/02/2e99ff04-0b0e-4fa9-b43a-3a42fb7e0d94_pj7000_p_1500px-600x600.jpg)
![](https://www.heydensupply.com/wp-content/uploads/2023/02/432272d5-e0b5-4493-88e9-b7b1f2b42a5e_pj7000_b_1500px-600x600.jpg)
Free Shipping
$233.75
Features
- Powerful 5.6 AMP motor delivers 11,000 RPM for quick, precise cutting in a variety of woods
- Cast aluminum pivot fence with three positive stops at 0°, 45° and 90°
- Six depth settings with one-touch stops for most common biscuits sizes including #0, #10, and #20
- Large and easy-to-operate cam locks for angle guide and fence adjustments
- Rack-and-pinion vertical fence system engineered for accurate fence adjustments
-
![GRJ02M1](https://www.heydensupply.com/wp-content/uploads/2023/02/0e84499e-99d1-4c55-81ee-1a92ec6ee985_grj02m1_k_1500px-600x600.jpg)
![](https://www.heydensupply.com/wp-content/uploads/2023/02/f6a7c94f-238e-4574-b329-abe49f405ed0_grj02m1_b_1500px-600x600.jpg)
Free Shipping
$530.00
Features
- Delivers the power of a 15 AMP corded Reciprocating Saw
- Makita-built brushless motor delivers up to 40% faster cutting speed
- Anti-Vibration Technology (AVT®) is an internal counterbalance system delivers up to 50% less vibration
- Variable speed control dial (0-3,000 strokes per minute) enables user to match the speed to the application
- On/Off orbital feature provides more aggressive cuts in wood
-
![GRJ02Z](https://www.heydensupply.com/wp-content/uploads/2023/02/d623e4ef-36ab-495e-9be7-3bdff52107e2_grj02z_p_1500px-600x600.jpg)
![GRJ02Z](https://www.heydensupply.com/wp-content/uploads/2023/02/9c8206f2-2fec-4b5a-b6a9-43aa899badf2_grj02z_a_1500px-600x600.jpg)
Free Shipping
$307.50
Features
- Delivers the power of a 15 AMP corded Reciprocating Saw
- Makita-built brushless motor delivers up to 40% faster cutting speed
- Anti-Vibration Technology (AVT®) is an internal counterbalance system delivers up to 50% less vibration
- Variable speed control dial (0-3,000 strokes per minute) enables user to match the speed to the application
- On/Off orbital feature provides more aggressive cuts in wood
-
![GRJ01Z](https://www.heydensupply.com/wp-content/uploads/2023/02/d477fc2e-0542-48dc-bf9b-ae5f27df2937_grj01z_p_1500px-600x600.jpg)
![GRJ01Z](https://www.heydensupply.com/wp-content/uploads/2023/02/53a050c8-f576-4cfc-bd24-12375eaf4860_grj01z_fc_1500px-1-600x600.jpg)
Free Shipping
$248.75
Features
- Makita-built brushless motor delivers up to 35% faster cutting speed
- The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
- Metal reinforced gear shaft and self-lubricating slider for increased durability
- Makita-built variable 2-speed brushless motor delivers 0-2,300 (Low) and 0-3,000 (High) strokes per minute
- Long 1-1/4″ stroke length provides increased cutting efficiency
-
![XSF05Z](https://www.heydensupply.com/wp-content/uploads/2023/02/09ed9d5f-70f1-417a-8d0e-34b2120a162c_xsf05z_p_1500px-600x600.jpg)
![XSF05Z](https://www.heydensupply.com/wp-content/uploads/2023/02/51a9f9ba-e679-4633-8ed6-2673d043f7e8_xsf05z_f_1500px-600x600.jpg)
Standard Shipping
$210.00
Features
- Brushless motor delivers 0-2,500 RPM with increased torque to handle high demand fastening applications
- Push Drive™ Technology – in lock-on mode the motor starts only when the fastener is engaged for a quieter work environment and to save battery power
- Depth adjustable nose piece with 5/16″ nutsetter delivers consistent screw fastening performance
- The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life
- Efficient BL™ Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
-
![XSF05T](https://www.heydensupply.com/wp-content/uploads/2023/02/1c23d463-e2a6-4a83-8d50-8b7fd35dd281_xsf05t_k_1500px-600x600.jpg)
![XSF05T](https://www.heydensupply.com/wp-content/uploads/2023/02/07b49fb2-e136-411b-b0bf-df3b4a5ec36b_xsf05t_f_1500px-600x600.jpg)
Free Shipping
$476.25
Features
- Brushless motor delivers 0-2,500 RPM with increased torque to handle high demand fastening applications
- Push Drive™ Technology – in lock-on mode the motor starts only when the fastener is engaged for a quieter work environment and to save battery power
- Depth adjustable nose piece delivers consistent screw drive performance
- The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life
- Efficient BL™ Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
-
![XSF03TX2](https://www.heydensupply.com/wp-content/uploads/2023/02/3205f6c7-b7a2-41eb-8fc4-43c1e7dc3264_xsf03tx2_k_1500px-600x600.jpg)
![XSF03TX2](https://www.heydensupply.com/wp-content/uploads/2023/02/f9d6b1c9-1328-4b9d-8d5a-ec63b21a48f7_xsf03tx2_f_1500px-600x600.jpg)
Free Shipping
$434.75
Features
- Push Drive™ Technology – in lock-on mode the motor starts only when the fastener engages for longer run-time and motor noise reduction
- BL™ Motor delivers 0-4,000 RPM to handle a variety of drywall and framing applications
- The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life
- Included: Collated Screw Magazine with easy and reliable auto-feed capability is ideal for production drywall hanging
- Collated screw length capacity range from 1″ to 2-3/16″ for increased versatility
-
![XSF03T](https://www.heydensupply.com/wp-content/uploads/2023/02/08e06d58-a409-4c6d-ae93-024d47932c1a_xsf03t_k_1500px-600x600.jpg)
![](https://www.heydensupply.com/wp-content/uploads/2023/02/26488c05-163d-4a34-acc1-8ea2b207a72f_xsf03t_f_1500px-600x600.jpg)
Free Shipping
$361.25
Features
- Drives 2,325 screws with Push Drive™ Technology using 18V LXT® 5.0Ah Battery*
- BL™ Motor delivers 0-4,000 RPM to handle a variety of drywall and framing applications
- Push Drive™ Technology – in lock-on mode the motor starts only when the fastener engages for more efficient battery usage and increased drywall installation
- The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life
- Efficient BL™ Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
-
![Makita GEC01PL](https://www.heydensupply.com/wp-content/uploads/2023/02/e931e332-d5a0-4310-b2b0-bfc88f701eb5_gec01pl_k_1500px-600x600.jpg)
![GEC01PL](https://www.heydensupply.com/wp-content/uploads/2023/02/cc48598a-054c-431f-b6e8-eea77e8c41d9_gec01pl_f_1500px-600x600.jpg)
Free Shipping
$2,148.75
Features
- Makita GEC01PL Delivers the power of a 75.6cc Gas Saw
- Cuts up to 15 ft. in concrete and makes 115 cuts in #5 rebar on a single charge
- No Gas, No Fumes, No Pull-Starts, Zero Limitations
- Integrated Anti-Vibration mechanism provides up to 50% less vibration when cutting
- Active Feedback-sensing Technology (AFT®) electronically turns off the motor if rotation of wheel is suddenly forced to stop
- Electric brake allows the tool to be repositioned faster for maximum productivity
-
![GEC01Z](https://www.heydensupply.com/wp-content/uploads/2023/02/9cb99577-224c-4585-8bb7-d2cb951567a7_gec01z_p_1500px-600x600.jpg)
![](https://www.heydensupply.com/wp-content/uploads/2023/02/d150c4fe-4e7d-4e85-bcf9-1123138e5047_gec01z_a_1500px-600x600.jpg)
Free Shipping
$1,562.50
Features
- Delivers the power of a 75.6cc Gas Saw
- Cuts up to 15 ft. in concrete and makes 115 cuts in #5 rebar on a single charge
- No Gas, No Fumes, No Pull-Starts, Zero Limitations
- Integrated Anti-Vibration mechanism provides up to 50% less vibration when cutting
- Active Feedback-sensing Technology (AFT®) electronically turns off the motor if rotation of wheel is suddenly forced to stop
- Electric brake allows the tool to be repositioned faster for maximum productivity and efficiency
-
![XPP01ZK](https://www.heydensupply.com/wp-content/uploads/2023/02/fbb8d536-704b-4f39-845d-c018e4a5ecc0_xpp01zk_p_1500px-600x600.jpg)
![XPP01ZK](https://www.heydensupply.com/wp-content/uploads/2023/02/7c65da57-09c6-4278-955c-e73022017aba_xpp01zk_fc_1500px-1-600x600.jpg)
Free Shipping
$2,723.75
Features
- Makita 18V LXT® Lithium-Ion battery allows for complete cordless hole punching mobility without the hassles of a cord
- Punches up to (180) 25/32″ diameter holes in 1/4″ thick steel with a 5.0Ah 18V LXT® Battery (battery not included)*
- Punch stop mechanism automatically retracts the die once a punch is complete to quickly continue operation
- Grip handle rotates 360° allowing for optimal positioning in a variety of spaces
- Adjustable depth guide allows for punch location adjustment up to 1-37/64″ (40 mm) from the edge of the workpiece
- Max metal plate thickness capacity of 5/16″ in general steel and 15/64″ in stainless steel
-
![XPP01T1K](https://www.heydensupply.com/wp-content/uploads/2023/02/7993a11d-525a-4b07-9a60-e9b380c838fb_xpp01t1k_k_1500px-600x600.jpg)
![XPP01T1K](https://www.heydensupply.com/wp-content/uploads/2023/02/f30f5c40-1a6b-4674-9a87-ac759f1c85f2_xpp01t1k_f_1500px-600x600.jpg)
Free Shipping
$2,687.50
Features
- Makita 18V LXT® Lithium-Ion battery allows for complete cordless hole punching mobility without the hassles of a cord
- Punches up to (180) 25/32″ diameter holes in 15/64″ thick steel with a 5.0Ah 18V LXT® Battery
- Punch stop mechanism automatically retracts the die once a punch is complete to quickly continue operation
- Grip handle rotates 360° allowing for optimal positioning in a variety of spaces
- Adjustable depth guide allows for punch location adjustment up to 1-37/64″ (40 mm) from the edge of the workpiece
- Max metal plate thickness capacity of 5/16″ in general steel and 15/64″ in stainless steel
-
![DS4012](https://www.heydensupply.com/wp-content/uploads/2023/02/9c312a04-f28e-4412-b7a4-6baa4df9c759_ds4012_f_1500px-600x600.jpg)
![](https://www.heydensupply.com/wp-content/uploads/2023/02/64561ea2-2abf-4a33-a074-c5c42ca8f3de_ds4012_p_1500px-600x600.jpg)
Free Shipping
$266.23
Features
- Variable speed (0 – 600 RPM) for mixing and drilling in a wide variety of materials
- Forward and reverse lever for operator convenience
- Well-balanced design at only 6.2 lbs. for reduced operator fatigue
- D-handle rotates 360° with 24 detent stops for multi-position operation
- Rubberized grip for increased operator comfort
-
![DS4011](https://www.heydensupply.com/wp-content/uploads/2023/02/424ea8d9-b37e-4f90-a497-3b03f22967ae_ds4011_p_1500px-600x600.jpg)
![](https://www.heydensupply.com/wp-content/uploads/2023/02/72dfd60d-effd-4866-a15d-5485d360dfcb_ds4011_b_1500px-600x600.jpg)
Free Shipping
$223.75
Features
- 600 RPM provides increased speed and torque for drilling large holes
- Heavy duty industrial 1/2″ drill chuck engineered for positive bit retention
- All-ball bearing construction for durability and longer tool life
- Rocker switch for quick transition between forward and reverse operation
- On-board chuck key storage for fast and convenient bit changes
-
![XTW01PT](https://www.heydensupply.com/wp-content/uploads/2023/02/5160f738-dee0-438a-b790-5562e0bf7069_xtw01pt_k_1500px-600x600.jpg)
![5bb9d2db-c075-4565-a589-79b425e6fe29_xtw01pt_f_1500px](https://www.heydensupply.com/wp-content/uploads/2023/02/5bb9d2db-c075-4565-a589-79b425e6fe29_xtw01pt_f_1500px-1-600x600.jpg)
Free Shipping
$2,787.50
Features
- Two 18V LXT® Lithium-Ion batteries deliver the power and run time for corded demands without leaving the 18V LXT® platform
- Up to 14% faster fastening than Makita corded model 6922NB
- Tightens up to 315 M22 torque control bolts per charge using two LXT® 5.0Ah batteries
- Powerful BL™ Brushless motor delivers 593 ft.lbs. of torque to handle the most demanding applications
- Electric brake allows the tool to be repositioned faster for maximum productivity
-
![XTU02T](https://www.heydensupply.com/wp-content/uploads/2023/02/a2fc1479-1753-4745-8f26-8c9064a33c6e_xtu02t_k_1500px-600x600.jpg)
![](https://www.heydensupply.com/wp-content/uploads/2023/02/1273aced-3287-4230-a42c-c2255e8ca126_xtu02t_f_1500px-600x600.jpg)
Free Shipping
$490.00
Features
- Ideal for mixing drywall mud, plaster, drilling large holes and more
- Variable 2-speed design (0-350 RPM and 0-1,300 RPM) for optimum speed control and mixing versatility
- Variable speed trigger allows the operator to adjust speed to the material or application
- Soft start suppresses start-up reaction for better accuracy
- Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions
-
![XTU02Z](https://www.heydensupply.com/wp-content/uploads/2023/02/bc530a23-2698-44f1-a3fb-c003aede7140_xtu02z_p_1500px-600x600.jpg)
![XTU02Z](https://www.heydensupply.com/wp-content/uploads/2023/02/e9346686-3071-4ee2-ab91-8e96be0d483c_xtu02z_f_1500px-600x600.jpg)
Free Shipping
$278.75
Features
- Ideal for mixing drywall mud, plaster, drilling large holes and more
- Variable 2-speed design (0-350 RPM and 0-1,300 RPM) for optimum speed control and mixing versatility
- Variable speed trigger allows the operator to adjust speed to the material or application
- Soft start suppresses start-up reaction for better accuracy
- Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions
-
![GAD02Z](https://www.heydensupply.com/wp-content/uploads/2023/02/9d924bf3-8394-4ef5-a9f3-ffaf46845760_gad02z_p_1500px-600x600.jpg)
![](https://www.heydensupply.com/wp-content/uploads/2023/02/6fe34d45-ed2c-4224-91a5-a9f0287ba574_gad02m1_f_1500px-600x600.jpg)
Free Shipping
$565.00
Features
- Makita built brushless motor with two speed, variable speed (0-400 RPM and 0-1,500 RPM) for maximum efficiency and a wide range of drilling applications
- Drills up to 6-1/4″ holes with hole saws and 4-5/8″ holes with self feed bits
- Weighs only 11.9 lbs. with battery and ergonomic design for operator comfort (battery not included)
- Torque limiter; built-in clutch reduces gear damage by disengaging gears if the bit binds
- Built-in L.E.D light with pre-glow and afterglow illuminates the work area
-
![XUC01X2](https://www.heydensupply.com/wp-content/uploads/2023/02/222a0559-81ae-4205-a42d-7aff4736e923_xuc01x2_p_1500px-1-600x600.jpg)
![](https://www.heydensupply.com/wp-content/uploads/2023/02/37f3891e-add8-4a8b-b738-93ddda424446_xph07tb_f_1500px-6-600x600.jpg)
Oversized - Special Order
$1,206.25
Features
- Up to 100 minutes of run time with two 18V LXT® 5.0Ah batteries (batteries sold separately)
- Powered by (1) 18V LXT® battery with the option to insert (1) additional battery for extended run time (batteries sold separately)
- Makita-built brushless motor for optimal performance
- 290 lbs. maximum load capacity
- Large knobs for easy extension of front and side rails
-
![XPG01S1](https://www.heydensupply.com/wp-content/uploads/2023/02/22a6b965-9e2f-4aef-9f2a-b6308e9e0405_xpg01s1_k_1500px-600x600.jpg)
![](https://www.heydensupply.com/wp-content/uploads/2023/02/4031ed45-4916-45a3-9073-9c8048b80453_xpg01_fc_1500px-2-600x600.jpg)
Free Shipping
$390.00
Features
- Powerful motor delivers up to 10,000 PSI of Max pressure
- Features two speed modes; Low and Auto-Speed for better control
- Auto-Speed mode applies grease while varying the flow rate automatically matching the resistance of the part being greased
- Variable speed trigger allows the user to adjust discharge rate
- Lock-on button for user convenience during longer work periods
-
![HM1213C](https://www.heydensupply.com/wp-content/uploads/2023/02/d1924fef-f7dd-4db1-a437-81818862fa53_hm1213c_k_1500px-600x600.jpg)
![](https://www.heydensupply.com/wp-content/uploads/2023/02/a98d162c-84e5-4204-b3ab-5a2776e085ba_hm1213c_fc_1500px-600x600.jpg)
Free Shipping
$986.25
Features
- Powerful 14 AMP motor delivers 18.8 ft.lbs. of impact energy to handle the most demanding applications
- Anti-Vibration Technology (AVT®) is an internal counterbalance system that greatly reduces vibration
- Additional vibration-absorbing rear handle is spring-loaded to further reduce vibration
- Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
- Soft start suppresses start-up reaction for more precision and better accuracy
-
![](https://www.heydensupply.com/wp-content/uploads/2023/02/c55bc32e-5254-4ddf-871e-43a8fa412224_hm0871c_k_1500px-600x600.jpg)
![](https://www.heydensupply.com/wp-content/uploads/2023/02/9fd04caf-0f55-4798-8f8a-a8e2fde64ac6_hm0871c_fc_1500px-600x600.jpg)
Free Shipping
$618.75
Features
- Powerful 10 AMP motor delivers 8.6 ft.lbs. of impact energy to handle the most demanding applications
- Anti-Vibration Technology (AVT®) is an internal counterbalance system that greatly reduces vibration
- Additional vibration-absorbing rear handle is spring-loaded to further reduce vibration
- Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
- Soft start suppresses start-up reaction for better accuracy
-
![GMH01Z](https://www.heydensupply.com/wp-content/uploads/2023/02/171f6819-6059-49c3-87d4-41520f0199c9_gmh01z_p_1500px-600x600.jpg)
![GMH01Z](https://www.heydensupply.com/wp-content/uploads/2023/02/c0d39d6e-9f99-4604-9b81-febac6820f2b_gmh01z_fc_1500px-600x600.jpg)
Free Shipping
$572.50
Features
- Makita-built brushless motor along with 40V max XGT® battery combine to deliver up to 20% faster breaking efficiency than corded equivalent model*
- Constant speed control automatically applies additional power under load for optimum performance
- Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions
- Anti-Vibration Technology (AVT®) is an internal counterbalance system along with vibration-absorbing handles that work together to reduce vibration
- Auto-start Wireless System (AWS®) utilizes Bluetooth® technology for wireless power-on/off communication between tool and dust extractor (AWS® Transmitter sold separately)
-
![XKH01Z](https://www.heydensupply.com/wp-content/uploads/2023/02/5ac71f8c-ae56-477d-9736-f2fd79dc1532_xkh01z_p_1500px-600x600.jpg)
![XKH01Z](https://www.heydensupply.com/wp-content/uploads/2023/02/f9baee0e-793c-4dc3-b0d5-eb68a07340df_xkh01z_fc_1500px-600x600.jpg)
Free Shipping
$546.25
This item has been DISCONTINUED.
-
![Makita XWT18Z](https://www.heydensupply.com/wp-content/uploads/2023/02/0502ab76-2c13-465b-9b30-71d8b56febcb_xwt18z_p_1500px-600x600.jpg)
![Makita XWT18Z Makita XWT18Z](https://www.heydensupply.com/wp-content/uploads/2023/02/8602ab14-3714-43b0-b4e1-b57ee9476bcf_xwt18_fc_1500px-1-600x600.jpg)
Free Shipping
$295.00
Features
- The Makita XWT18Z BL™ Brushless Motor delivers 520 ft.lbs. of Fastening Torque and 740 ft.lbs. of Nut-Busting Torque
- Compact and ergonomic design at only 6-11/16″ long
- 4-speed power selection switch (0-500 / 0-1,200 / 0-1,900 / 0-2,200 RPM & 0-1,000 / 0-1,700 / 0-2,400 / 0-2,700 IPM) for precise fastening control in a wide range of applications
- 3 forward and 3 reverse Auto-Stop modes for increased efficiency
- Full speed mode function reduces trigger pull to reach full speed
-
![XWT07Z](https://www.heydensupply.com/wp-content/uploads/2023/02/c7915bcc-9ee9-4079-95df-48f185ca1707_xwt07z_p_1500px-1-600x600.jpg)
![XWT07Z](https://www.heydensupply.com/wp-content/uploads/2023/02/37f3891e-add8-4a8b-b738-93ddda424446_xph07tb_f_1500px-4-600x600.jpg)
Free Shipping
$371.25
Features
- BL™ Brushless Motor delivers 780 ft.lbs. of Fastening Torque and 1,250 ft.lbs. of Nut-Busting Torque
- 3-speed power selection switch (0-900/ 0-1,000/ 0-1,800 RPM & 0-1,800/ 0-2,000/ 0-2,200 IPM) provides precise fastening control for a wide range of applications
- 3/4″ anvil with friction ring and thru hole retention system for maximum productivity
- Efficient BL™ Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The BL™ Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life
-
![GRH05Z](https://www.heydensupply.com/wp-content/uploads/2023/02/36cd12a4-61e3-4a37-9181-16fa90acfbe6_grh05z_p_1500px-600x600.jpg)
![GRH05Z](https://www.heydensupply.com/wp-content/uploads/2023/02/bf8dd77e-0604-4f73-908f-ac7f25d23330_grh05z_fc_1500px-600x600.jpg)
Free Shipping
$761.25
Features
- Makita-built brushless motor along with 40V max XGT® battery combine to deliver the power performance required for heavy-load application
- Auto-start Wireless System (AWS®) utilizes Bluetooth® technology for wireless power-on/off communication between tool and dust extractor (AWS® Transmitter sold separately)
- Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions
- Anti-Vibration Technology (AVT®) is an internal counterbalance system along with vibration-absorbing handles that work together to reduce vibration
- Active Feedback-Sensing Technology (AFT®) electronically turns off the motor if rotation of bit is suddenly forced to stop
-
![DWD181R1J](https://www.heydensupply.com/wp-content/uploads/2023/02/2c5ae301-5b44-4430-8e7f-7b77c5bc5e79_dwd181r1j_k_1500px-600x600.jpg)
![DWD181R1J](https://www.heydensupply.com/wp-content/uploads/2023/02/5a69dc6a-8e97-4890-91b2-80af6e388b6f_dwd181_fc_1500px-600x600.jpg)
Free Shipping
$1,736.25
Features
- Quickly locates objects in multiple types of base materials to allow for immediate cutting, drilling, or coring for through penetrations
- Capable of detecting a variety embedded objects such as; metals (steel, aluminum, copper), wood, plastic and shielded electrical wire up to 7″ deep
- Selectable base material modes allow for increased versatility in dry concrete, wet concrete, wall partitions (wood or drywall) and hollow block
- Simplified user interface displays center, edge position, relative width and depth of embedded objects
- Multi-detection mode allows for scanning in up to three parallel surface positions; ideal for detecting objects running diagonally or detection affirmation
-
![GBU01Z](https://www.heydensupply.com/wp-content/uploads/2023/02/fbf9fb1a-2c92-4b78-9bf3-200dca554d0c_gbu01z_p_1500px-600x600.jpg)
![GBU01Z](https://www.heydensupply.com/wp-content/uploads/2023/02/2910611c-23b1-49f9-b3d4-c9d633c823c1_gbu01z_fc_1500px-600x600.jpg)
Free Shipping
$261.25
Features
- Makita-built brushless motor delivers up to 565 CFM and 143 MPH
- Move heavy debris with turbo boost mode
- XPT™ is engineered to provide increased dust and water resistance in harsh job site conditions
- Up to 44% more blowing force than a 24.5cc gas blower
- Turbo boost mode delivers 565 CFM for heavy debris
-
![XRV01Z](https://www.heydensupply.com/wp-content/uploads/2023/02/306bdb66-57e1-496d-a3b4-68a34baab407_xrv01_f_1500px-600x600.jpg)
![XRV01Z](https://www.heydensupply.com/wp-content/uploads/2023/02/a0e875f7-cf41-44e5-a49f-1126f6222c0b_xrv01z_p_1500px-600x600.jpg)
Free Shipping
$425.00
Features
- Makita-built motor delivers 13,000 VPM to help increase strength of concrete
- Dual-directional switch to conveniently hold the tool in either horizontal or vertical positions
- Up to 25 minute run time under load
- Compact and ergonomic design at only 58-1/2″ long
- Weighs only 7.7 lbs. with battery (battery not included) for reduced operator fatigue
-
![XWL01Z](https://www.heydensupply.com/wp-content/uploads/2023/02/19cf9ef8-5399-4573-98ee-43b87ac5735c_xwl01z_p_1500px-600x600.jpg)
![](https://www.heydensupply.com/wp-content/uploads/2023/02/cbc70268-cc20-4d13-9346-2ebda47a9b23_xwl01_f_1500px-600x600.jpg)
Free Shipping
$427.50
Features
- Two 18V LXT® Lithium-Ion batteries deliver the power and run time for corded demands without leaving the 18V LXT® platform (batteries not included)
- The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life; delivers 3,800 RPM
- Large spark guard captures and deflects debris away from the surrounding area
- Electric brake allows adjustments to be completed faster for maximum productivity
- “Tool-less” flange removal for quick and easy wheel changes
-
![XAG26Z](https://www.heydensupply.com/wp-content/uploads/2023/02/bd2a2a59-1098-4bc7-b31e-8954e8e96bb2_xag26z_p_1500px-600x600.jpg)
![XAG26Z](https://www.heydensupply.com/wp-content/uploads/2023/02/7ed308ac-e1b5-40f5-9aea-bb5e763efb93_xag26z_fc_1500px-600x600.jpg)
Free Shipping
$211.25
Features
- X-LOCK quick change system allows for tool-free wheel changes with simple snap-on mounting and pull release lever for change-out
- The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life; delivers 8,500 RPM
- Active Feedback-sensing Technology (AFT®) turns the motor off if rotation of the wheel is suddenly forced to stop
- Electric Brake stops the grinding or cut-off wheel in 2 seconds or less for maximum productivity
- Automatic Speed Change™ technology adjusts speed and torque during operation for optimum performance
-
![XCS04T1](https://www.heydensupply.com/wp-content/uploads/2023/02/102764eb-dfe3-4483-9cf1-50b89d180c0f_xcs04t1_k_1500px-600x600.jpg)
![](https://www.heydensupply.com/wp-content/uploads/2023/02/38bd16ff-352a-4135-baa0-0881b054d70b_xcs04t1_f_1500px-600x600.jpg)
Free Shipping
$2,323.75
Features
- Performs up to 233 cuts of #5 rebar with one 18V LXT® 5.0Ah Battery
- Cutting capacity range of 1/8″- 5/8″
- Spark free cutting of rebar and steel rod
- The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life
- Fast and effortless cutting speed of #5 rebar in 2.8 seconds
-
![XCS01T1](https://www.heydensupply.com/wp-content/uploads/2023/02/76512759-f869-45cd-8671-f2f407e0e94e_xcs01t1_k_1500px-600x600.jpg)
![XCS01T1](https://www.heydensupply.com/wp-content/uploads/2023/02/01230dde-0174-42a0-a20e-f20c0dd48e7c_xcs01t1_f_1500px-600x600.jpg)
Free Shipping
$2,498.75
Features
- Up to 125 cuts of #6 (3/4″) rebar on a single charge using 5.0Ah LXT® Battery
- Cutting capacity range of 1/8″- 3/4″; cuts up to 60 grade #6 rebar
- 4-way rotatable cutting blade makes up to 4,000 cuts of #3 (3/8″) rebar before needing to be replaced
- Cutting head rotates 360° for different cutting positions
- Adjustable stopper holds the rebar at 90° to the cutting blade and assists in smooth cutting
-
![XBU02Z](https://www.heydensupply.com/wp-content/uploads/2023/02/92f5c611-5173-48e2-8fd8-f0864e949ca1_xbu02z_f_1500px-600x600.jpg)
![XBU02Z](https://www.heydensupply.com/wp-content/uploads/2023/02/7fdacff9-4ff4-49e7-a8a8-cf54c57eae3a_xbu02z_f_1500px-600x600.jpg)
Free Shipping
$265.00
Features
- Sound pressure rating of 61 dB(A); measured per ANSI B 175.2 standard
- Makita-built motor produces a maximum air velocity of 120 MPH
- 6-stage air velocity/volume selection dial with variable speed control trigger
- Delivers up to 28 minutes of run time at 15,800 RPM using two 18V LXT® 5.0Ah batteries (batteries not included)
- Zero emissions and reduced maintenance; no need for gas or oil
-
![XGC01Z](https://www.heydensupply.com/wp-content/uploads/2023/02/836cef8a-bb09-4637-820a-0b3cad27eef4_xgc01z_p_1500px-600x600.jpg)
![XGC01Z](https://www.heydensupply.com/wp-content/uploads/2023/02/f3388aa7-fa36-494b-b530-f506c92a5c32_xgc01z_b_1500px-600x600.jpg)
Free Shipping
$287.50
Features
- Makita-built motor delivers 1,100 lbs. of dispensing force to dispense the highest viscosity adhesives and sealants
- 5 speed dial optimizes flow rate from 0-66 IPM
- Variable speed trigger allows user to match speed to the application
- 360° rotatable cartridge holder fits 10 oz. and 300 ml cartridges
- Drip-reduction feature automatically relieves pressure on the material when trigger is released to prevent unintentional dispensing