Showing 41–80 of 284 results
-
$503.71
Features
- Mix up to 19 premixed drywall buckets (5 gal.) on a single charge using the DCB606 DEWALT FLEXVOLT® battery (6Ah)**
- Mix up to 17 buckets of tile mortar (5 gal.) on a single charge using THE DCB606 FLEXVOLT battery (6.0Ah)**
- Mix up to 9 buckets of concrete (4.5 gal.) on a single charge using THE DCB606 FLEXVOLT battery (6.0Ah)**
- 3-Position side handle allows for optimum position while mixing
- Integrated E-Clutch System helps to improve user control
-
Free Shipping
$342.99
Features
- Brushless motor for efficient performance and runtime
- Wide variable speed range with dedicated High and Low settings helps optimize usage in light- and heavy-gauge substrates
- Four dedicated tool modes enable operation of tool in Trigger Mode (High Speed), Trigger Mode (Low Speed), PushStart Mode, and Lock-On Mode
- Top-mounted electronic mode select enables fast, one-handed switching between the tool’s four modes
- Adjustable nosecone enables consistent setting of proper screw depth
-
Oversized - Special Order
$1,206.25
Features
- Up to 100 minutes of run time with two 18V LXT® 5.0Ah batteries (batteries sold separately)
- Powered by (1) 18V LXT® battery with the option to insert (1) additional battery for extended run time (batteries sold separately)
- Makita-built brushless motor for optimal performance
- 290 lbs. maximum load capacity
- Steel bucket provides 3 cu. ft. capacity
-
Free Shipping
$282.50
Features
- Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
- Provides up to 65% more run time per charge compared to BL1830
- Reaches full charge in 45 minutes or less
- Compatible only with STAR Protection tools, indicated by the Star symbolâ„¢ and/or yellow battery receiver under the tool
- Battery delivers consistent power and run time in extreme temperatures, even in winter (-4°F/-20°C)
- Equipped with Star Protection Computer Controlsâ„¢ to protect against overloading, over-discharging and over-heating
- Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
- Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications
- Battery resists self-discharge and remains ready for use even after long periods of storage
-
Free Shipping
$210.99
Features
- Mechanical 2-speed transmission (0-500 & 0-1,900 RPM) for a wide range of drilling and fastening applications
- Makita-built brushless motor delivers 440 in.lbs. of Max Torque
- Weighs only 3.6 lbs. with battery for reduced operator fatigue
- Built-in dual L.E.D. lights with afterglow illuminate the work area
- 3-year limited warranty on tool, battery and charger
-
Free Shipping
$201.99
Features
- Makita XPH14Z features a built BLâ„¢ Brushless Motor that delivers 1,250 in.lbs. of Max Torque
- Compact and ergonomic design at only 7″ long; 14% shorter than previous model
- 2-speed transmission (0-550 & 0-2,100 RPM) for a wide range of drilling, fastening and hammer drilling applications
- 0-31,500 BPM for faster hammer drilling in masonry materials
- All metal 1/2″ self ratcheting chuck for improved bit gripping strength and durability
- Weighs only 6.0 lbs. with battery (battery not included) for reduced operator fatigue
- L.E.D. lights illuminate the work area
- Rubberized soft grip provides increased operator comfort
- Efficient BLâ„¢ Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The electronically-controlled BLâ„¢ Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
-
SALEÂ 19% OFF
Free Shipping
$518.17 Original price was: $518.17.$421.01Current price is: $421.01.
Features
- Brushless motor delivers up to 565 CFM and 143 MPH
- Up to 35 minutes of run time with 40V XGT? 4.0Ah battery
- Cruise control lever with variable speed trigger adjusts between 0 – 476 CFM
- 3-stage telescoping long nozzle
- Speed lock for convenient and continuous operation
-
Free Shipping
$338.99
Features
- 20V Max
- Light Weight
- Brushless Cordless Tool
- 3 Mode LED
-
Free Shipping
$2,973.66
The PJRC160 is a professional grade cordless brushless re-bar cutter with a 360 degree rotatable head.
-
Special Order Shipping
$2,460.93
Features:
- 5 times faster than manual tying
- Lightweight and compact body for easy maneuvering and one handed operation
- Li-ion battery can complete 2600 ties per charge
- Ties approximately 120 times per coil.
- Brushless twisting motor
-
Special Order Shipping
$4,076.97
FEATURES
- REDUCES BACK STRAIN – The RB401T-E is an ergonomic solution for backbreaking slab work.
- ADJUSTABLE HANDLES – Users can adjust the handles to 2 positions, to find the most comfortable fit for their height.
- TRIGGERLESS TECHNOLOGY – An automatic contact mechanism (Pat. Pending) allows the tool to instantly tie when pushed down over a rebar intersection.
- SHORTER TIE HEIGHT (Pat. Pending) – A Wire Bending Mechanism produces a shorter tie height. Less concrete is needed to fully cover a wire tie.
- ENCLOSED DESIGN – Greater protection against debris and moisure entering the tool.
- QUICKLY & EASILY LOAD TIE WIRE – Rapidly load the dual wire coil with the quick load magazine design.
-
SALEÂ 19% OFF
Rated 5.00 out of 5
Free Shipping
$1,193.51 Original price was: $1,193.51.$969.73Current price is: $969.73.
Features:
- 18V 5Ah Battery Fully Charged in 45 Minutes with Dual Port Rapid Charger Included
- Includes 4 Batteries
- Only 13.9lbs and Zero Emissions
- Low maintenance, no gas/oil mixes, no pull starts
- Compatible with Makita 18V Lithium-Ion batteries with a Star symbol
- Integrated water delivery system continuously feeds water for OSHA Table 1 Compliance in concrete cutting applications
-
Free Shipping
$2,680.11
The RB518 is a battery operated rebar tying tool that can tie #5 x #5 to #7 x #8 rebar. You will save time, save money and increase productivity with this handy cordless tool. MAX Re-Bar-Tiers are also proven to reduce the risk of developing musculoskeletal diseases.
-
Free Shipping
$399.99
Features
- The Dewalt DCN623D1 unit works with 23 Ga. pin nails from 5/8″ up to 1-1/2 in. in length
- tool-free jam release and tool-free depth adjust
- Low nail lockout system with LED indicator to inform user when it’s time to reload
- Drives 2,000 nails on average per charge
-
Free Shipping
$253.99
Features
- The Dewalt DCF850E1 includes a Compact impact driver, under 4 in. design for optimized ergonomics and access to difficult-to-reach spots
- Delivers 1,825 in-lbs of torque and 3,250 RPM to drive large diameter screws
- Enabled by variable 3-speed trigger
- Integrated 3-LED work light enhances visibility in dimly lit spaces
-
Free Shipping
$326.99
Features
- The Dewalt DCK279C2 includes the DCD709 hammer drill/driver, compact at only 6.9 in. front to back designed to fit in tight spaces
- DCD709 hammer drill/driver is lightweight at only 2.5 lbs.
- DCF809 Impact Driver is only 5.1 in. in length to fit in tight spaces.
- DCF809 Impact Driver has 1700 in-lbs of torque delivering the power you need to get a majority of applications done
- DCF809 Impact Driver is lightweight at only 2.1 lbs.
-
Free Shipping
$817.99
Features
- Work in tight spaces with the lightweight, compact 7-1/2 in. Drill/Driver and 5-2/5 in. Cordless Impact Driver included in the Dewalt DCKSS676D2
- Brighten dark work areas: DCD777 Cordless Drill/Driver features an LED work light with 20-second trigger-release delay for enhanced visibility
- Professional speed and application control with DCF787 Cordless Impact Driver”s variable speed trigger for precision on delicate work surfaces
- Quick bevel adjustments: Brushless Circular Saw bevel shifts from 0 – 50° with a tool-free lever
- Quickly change blades and attachments without wrenches using the DCS356 Quick Change accessory system
-
Free Shipping
$597.99
Features
- Dewalt DCE400D2 Expands 3/8 in. – 1 in. Pex Type-A tubing
- Automatic rotating head action for even expansion
- Full trigger actuation for use in tight spaces
- Bright LED work light to help illuminate dark areas
- Uses DEWALT® PEX Heads. Compatible with Milwaukee® and Uponor® Heads. (Milwaukee® is a registered trademark of Milwaukee Electric Tool Corp. Uponor® is a registered trademark of Uponor Oyj.)
-
Free Shipping
$265.99
Features
- Complete challenging projects with up to 40% more with the Dewalt DCD800P1 vs. the DCD791B using DCB205 battery (sold separately)
- Access hard to reach work areas: Compact 6.37 in. size is 1/2 in. shorter in length compared to the DCD791, tool head only.
- High bit retention with 1/2 in. metal ratcheting chuck
- Pro-level speed, control and precession: High-speed transmission with variable trigger and 2 speed settings (0-650/0-2,000 rpm)
- Brighten dark work areas: Adjustable 3-Position, 3 Mode LED with up to 70 Lumens, including LED spotlight mode which features a 20-minute shutoff function for extended work time in low-light spaces
-
Free Shipping
$727.99
Features
- Dewalt DCG460X2 3,000 MWO Brushless Motor – Brushless Motor Motor Producing 3,000 MWO Delivers Incredible Power for Extreme Applications
- Kickback Brake – Kickback Brake engages when a pinch, stall, or bind-up event is sensed
- E-Clutch – E-Clutch proactively stalls motor when tool is under too much load
- WTC – Wireless Tool Control enables connectivity to WTC enabled Vacuums
- Chip-Ready – Tool Connect Integrated Chip Pocket
-
Free Shipping
$350.99
Features
- Dewalt DCF500GG1 brushless motor delivers 50 ft-lbs of max torque and a no-load speed of 0-450 RPM
- Interchangeable anvil design provides the ability to quickly swap between 3/8″ square drive, and 1/4″ square drive, and 1/4″ quick change hex
- Oil resistant glass filled nylon tool housing resists effects of harsh automotive oils and solvents
-
Free Shipping
$423.99
Features
- DEWALT DCF510GE1 brushless motor delivers 75 ft-lbs of max torque and a no-load speed of 0-300 RPM
- Interchangeable anvil design provides the ability to quickly swap between 3/8″ and 1/2″ square drives
- Oil-resistant glass-filled nylon tool housing resists effects of harsh automotive oils and solvents
-
Free Shipping
$898.99
Features
- The Makita GT401M1D1 combo kit Variable 2-speed Hammer Driver-Drill with Makita-built brushless motor delivers (0-650 & 0-2,600 RPM) (0-9,750 & 0-39,000 BPM) and 1,250 in.lbs. of Max Torque
- Impact Driver features 4-speed power selection (0-1,100/ 0-2,100/ 0-3,200/ 0-3,700 RPM & 0-1,100/ 0-2,600/ 0-3,600/ 0-4,400 IPM) provides 1,950 in.lbs. of Max Torque
- Recipro Saw delivers 0-2,300 (Low) & 0-3,000 (High) strokes per minute and a 1-1/4″ stroke length for faster cutting
- High-luminance 4 L.E.D. flashlight provides 160 lumens
- The Makita GT401M1D1XPT is engineered to provide increased dust and water resistance in harsh job site conditions
-
Free Shipping
$484.99
Features
- Makita XLC10R1W brushless motor runs cooler and more efficiently; delivers up to 42 CFM
- Push button 4-speed power selection (max/high/normal/quiet) for efficient operation
- Up to 27 minutes of continuous use in quiet mode from a single fully charged 18V Compact 2.0Ah LXT® battery; optional 5.0Ah battery delivers up to 69 minutes of continuous use
- Accepts disposable paper or reusable cloth dust bags for added convenience
- Compact and ergonomic design for operator comfort
-
Free Shipping
$1,698.99
Features
- TheDewalt DCH911Z2 brushless motor delivers 27 Joules of Impact Energy for fast chipping of concrete
- Rear handle design allows for Comfortable Operation In horizontal and downward chipping
- Wireless tool control technology enables the user to link the tool to the DCV585 60-Volt MAX dust extractor (sold separately) for remote extractor activation
- This cordless chipping hammer comes Tag Ready so individuals and companies can attach a DEWALT Tag (sold separately) to track its location via the DEWALT Tool Connect app
- The integrated SHOCKS Active Vibration Control system is designed to minimize vibration felt at the handles compared to chipping hammers without this feature
-
Free Shipping
$545.99
Features
- Makita GSH05M1 is up to 40% faster cutting speed
- Magnesium base for durability and less weight
- Up to 290 cuts per charge in 2X10 SPF lumber using one 4.0Ah battery
- Makita-built brushless motor delivers 5,200 RPM for faster cutting performance
- Large 2-1/4″ cutting capacity at 90° and 1-5/8″ at 45°
-
Free Shipping
$1,071.99
Features
- 2 mode power output levels: 350 watt and 500 watt
- Auto-switching 2 bay battery system for 2X more run time
- Ideal for transportation with built in carrying handle and space saving design at 1.5 cubic feet
- Durable water resistant design, dust resistant inlet port, and tempered glass door
- 2.1 gallon interior capacity ensures ample room for heating
-
Oversized - Special Order
$7,141.99
Features
- The Makita XUC06Z Delivers up to 100 minutes of run time (distance equivalent to 4.5 miles) under load using four 18V LXT® 6.0Ah BL1860 battery (battery not included)
- Holds (4) 18V LXT® Lithium-Ion batteries but operates using (2) 18V batteries at a time; utilizes additional batteries when needed (batteries not included)
- 3 forward speeds and one reverse with variable speed control by switch trigger in each range
- 295L heaped capacity with maximum load over 660 lbs
- Bucket equipped with a capped nozzle for draining liquid
-
Oversized - Special Order
$7,571.99
Features
- Makita XUC04Z Delivers up to 100 minutes of run time (distance equivalent to 4.5 miles) under load using four 18V LXT® 6.0Ah BL1860 battery (battery not included)
- Holds (4) 18V LXT® Lithium-Ion batteries but operates using (2) 18V batteries at a time; utilizes additional batteries when needed (batteries not included)
- 3 forward speeds and one reverse with variable speed control by switch trigger in each range
- 200L heaped capacity with maximum load over 660 lbs
- Hand lever-operated mechanical axle disc brake plus electromagnetic brake (motor)
-
Free Shipping
$410.99
Features
- The XT296ST features Makitas-built brushless motor which is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- Variable 2-speed 1/2″ Hammer Driver-Drill (0-550 & 0-1,800 RPM)(0-8,250 & 0-27,000 BPM) with brushless motor delivers 970 in.lbs. of Max Torque for up to 70% more power*; weighs only 4.9 lbs. with battery for a wide range of drilling, fastening and hammer drilling applications
- The brushless motor eliminates carbon brushes, enabling the motor to run cooler and more efficiently for longer life
- The electronically-controlled brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application
- Optimization of motor specifications and gear ratios improves efficiency and allows the Hammer Driver-Drill to drill into 2x dimensional lumbers in high speed
-
Free Shipping
$442.99
Features
- XPH16T features a variable 2-speed design (0-550 & 0-1,800 RPM) (0-8,250 & 0-27,000 BPM) covers a wide range of drilling, driving and hammer applications
- Makita-built brushless motor delivers 970 in.lbs. of Max Torque for up to 70% more power*
- Efficient brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The brushless motor eliminates carbon brushes, enabling the brushless motor to run cooler and more efficiently for longer life
- The electronically-controlled brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application
-
Special Order Shipping
$1,427.99
Features
- Makita-built brushless motor delivers the power of a 40cc gas brush cutter
- Automatic Torque Drive Technology mode automatically shifts from 3,500-6,400 RPM for extended run time or added power
- Up to 100 minutes of run time with (2) 40V XGT® 4.0Ah batteries
- No gas, emissions, oil mixing or pull starts
- High performance with low noise levels
-
Special Order Shipping
$1,557.99
Features
- Higher Capacity delivers 1,200 Watt Hours of Output
- Longer Run Time ideal for all day work; expected run times with PDC1200A01 may vary by product, application, and workday amount
- Ultimate Compatibly powers ConnectX™, 40V max XGT® and LXT® 18V X2 (36V) systems (40V max adapter sold separately)
- Durable Design IPX4-rated weather-resistant construction
- Integrated L.E.D. battery charge level indicator allows monitoring of battery charge
-
Free Shipping
$900.99
Features
- Makita-built brushless motor delivers the power of a 22.7cc gas hedge trimmer
- Up to 13% more torque than gas for cutting thick branches
- Up to 6 hours of run time with 40V XGT® 4.0Ah battery
- No gas, emissions, oil mixing or pull starts
- High performance with low noise levels
-
Special Order Shipping
$1,570.99
Features
- Makita GML01PL features a high torque motor,delivers gas performance high vacuum lift for premium cut quality
- Auto-switching 2 bay battery system for 2X more run time
- IPX4 weather-resistant construction for durability and long life
- No gas, emissions, oil mixing or pull starts
- High performance with low noise levels
-
Special Order Shipping
$845.99
Features
- No gas, emissions, oil mixing or pull starts with reduced maintenance and low noise levels
- Makita-built brushless motor delivers power of a 64cc gas backpack blower
- Delivers up to 4 hours of runtime with PDC1200A01 ConnectXâ„¢ 1,200Wh Portable Backpack Power Supply (power supply sold separately)
- High blowing force of 22 N for heavy debris
- Tube-mounted variable speed trigger adjusts between 0 – 670 CFM for power and run time management