Showing 1–40 of 284 resultsSorted by popularity
-
Free Shipping
$2,784.93Features:
- Double Tying Speed increases productivity
- Cost Saving – Mechanism dispenses precise amount of wire
- Shorter Tie Height
- Large Jaw – up to #7 x #7 rebar
- Long Battery Life up to 4,000 ties
- Easy Push Gear Release
- Fast Load Wire
-
Free Shipping
$440.99Features
- Brushless motor delivers up to 75% more runtime vs. 18v NiCad brushed motors
- XR Li-Ion batteries with fuel gauge provide 33% more capacity over standard packs
- 1/2-in ratcheting nitro-carburized metal chuck with carbide inserts
- 3-Mode LED up to 20X brighter than previous model
- LED spotlight mode features 20 minute shutoff function allowing for extended work time
- 3-speed all-metal high performance transmission
- 0-450/0-1300/0-2000 RPM in drill mode
- 0-500/0-1500/0-2250 RPM in hammer drill mode
-
Free Shipping
$3,067.57Features:
- Ties up to #9 x #10 rebar
- Double The Speed – Dual Wire Feeding Mechanism
- Dispenses precise amount of wire needed to form a tie
- Shorter Tie Height
- One charge yields up to 4,000 ties
- Easy Load Tie Wire with Quick Load magazine
-
Free Shipping
$229.32Max USA Battery Charger The JC925 (JC925A) is a charger for select rebar tying tool and rebar cutter/bender batteries from Max USA. This charger delivers a full charge in 65 minutes achieving 80% in just 50 minutes regardless of AH rating. Charges OEM lithium ion (Li-on) batteries for the following Max tools: RB218 RB398 RB518…
-
Free Shipping
$215.99Features
- Complete a wide variety of applications with up to 1,500 in-lbs of torque
- Bright LED with 20 second trigger delay for working in dark or confined spaces
- Variable speed trigger allows for control and precision on delicate work surfaces
- Easily change bits with quick release hex chuck
-
Standard Shipping
$317.99Features
- UP TO 77% MORE POWER** when paired with FLEXVOLT® batteries
- FASTER CUTTING: Powerful brushless motor delivers 5,500 RPM for faster cutting
- Maximum depth of cut of 2-9/16 in. at a 90°
- Maximum depth of cut of 2 in. at a 45°
- ELECTRIC BRAKE stops the blade after the trigger is released
- INCREASED VISIBILITY: Bright LED increases visibility and cut accuracy
- EASY STORAGE: Integrated rafter hook for quick and easy storage
- MINIMIZES DUST: Optional dust port allows connection to a dust extractor to minimize dust during cutting (DWE575DC Dust Port sold separately).
-
Free Shipping
$240.99Features
- Makita MP001GZ01 powerful Cordless High-Pressure Inflator delivers up to 160 PSI
- High visibility pressure gauge display with back light
- Auto-stop function automatically stops inflation
- Three speed settings (High/Medium/Low)
- 25-1/2in hose length
-
Free Shipping
$2,804.53Features:
- Replaces RB441T
- Fastest Tying Speed
- Cost Saving – Uses Less Wire!
- Short Tie Height
- Easy Wire Loading
- Easy Handling
- Built To Last
-
Free Shipping
$617.99Features
- 3.0 joules of impact energy provides corded power without the cord.
- Optimized ergonomic design provides excellent control in all orientations
- Durable three mode German engineered mechanism
- Wide optimal drilling range between 1/4 in. and 3/4 in.
- Factory-set clutch reduces sudden, high-torque reactions if bit jams.
- Optimized ergonomic design provides an exceptional drilling and chipping experience in overhead, horizontal and downward orientations.
- Constant speed under load for fast speed of application
-
Free Shipping
$1,146.99Features
- The Dewalt DCS692X2 prevents accidental activation with a 2-stage trigger switch
- Connect to other compatible tools and operate cord-free with WIRELESS TOOL CONTROL
- Real-time power and runtime feedback to help you manage your output with an integrated heavy-load indicator light
- 3-1/4 in. cut depth for single pass in pavestones, rebar cutting, and concrete scoring
-
Free Shipping
$629.99Features
- Dewalt DCS578X2 features Up to 47% more power vs the DCS575**
- Uses a 7-1/4 in. circular saw blade and features a maximum cut depth of 2-9/16 in. at a 90° bevel.
- Maximum bevel capacity of 57° with bevel stops at 22.5° and 45°
- Electric brake stops the blade after the trigger is released
- Integrated LED for increased visibility and cut accuracy
- Integrated rafter hook for quick and easy storage
-
Special Order Shipping
$699.99Features:
- 2 nails per second (16D / 8D / 6D)
- 900 nails per charge (w/ 36V 2.5Ah MultiVolt battery)
- Pneumatic-like feel with no gas, no hose, no compressor and zero ramp-up time
- Compatible with Duplex fasteners: 50214-6D: 2-1/4 x .131, 50234-8D: 2-3/4 x .131, 50312-16D: 3-1/2 x .131
-
SALE 14% OFF
Free Shipping
$232.50 Original price was: $232.50.$199.99Current price is: $199.99.Features
- Makita XWT15Z features 240 ft.lbs. of Fastening Torque and 430 ft.lbs. of Nut-Busting Torque
- 3 forward and 3 reverse Auto-Stop modes
- 4-speed power selection
- Weighs only 4.0 lbs. with battery
- Tool Only
-
Free Shipping
$399.00Features
- DeWalt DCK4050M2 Combo Kit
- DCD805: 40% more power versus the DCD796B using DCB205 battery or DCBP034 DEWALT POWERSTACK battery (sold separately)
- DCF850: Brushless motor that delivers up to 1,825 in-lb of torque and 3,250 rpm for driving large-diameter screws
- DCS356: The DUAL-GRIP variable-speed trigger and 3-speed selector provide ultimate speed and application control, and the bright LED illuminates dark workspaces.
- DCS382: FAST CUTS: Rapidly saw through various materials with 1-1/8 in. stroke length
-
Special Order Shipping
$329.99Features
- Mix up to 19 premixed drywall buckets (4.5 gal) on a single charge using DCB606 Flexvolt battery (6Ah).
- Mix up to 17 buckets of tile mortar (5 gal) on a single charge using DCB606 Flexvolt battery (6Ah)
- Mix up to 9 buckets of concrete (4.5 gal) on a single charge using DCB606 Flexvolt battery (6Ah)
- Integrated E-Clutch® System helps to improve user control.
- 3-Position side handle allows for optimum position while mixing.
-
$131.73Features
- DISCONTINUED, REPLACED with DCE512B
- Wide-range, variable speed control
- Multiple hanging options, free-standing, hang hooks, tripod-mount and wall-mount
-
$947.15Features
- DISCONTINUED – SEE DCS692X2 FOR UPDATED MODEL
- Cuts up to 25.5 ft. of 1 in. scoring in cure concrete per charge
- 3-1/4 in. depth of cut for single pass in pavestones, rebar cutting, and concrete scoring
- Heavy-load indicator light provides power and runtime feedback during demanding applications
- 5-position rotatable guard for approach angle selection, allowing for optimal visibility and accessibility when cutting in tight spaces
- Dual-sided water feed system offers an OSHA Table 1 Compliant solution for dust management when cutting concrete
-
Standard Shipping
$152.50Features
- Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
- Provides up to 65% more run time per charge compared to BL1830
- Reaches full charge in 45 minutes or less
- Compatible only with STAR Protection tools, indicated by the Star symbol™ and/or yellow battery receiver under the tool
-
Free Shipping
$605.99Features
- 13 Amp motor
- 9000 rpm no-load speed for applications with 6 in. grinder wheels
- Brake engages when trigger is released with stopping speeds of 1.5 seconds when using a standard grinding wheel (4-1/2 in. x 1/4 in. bonded abrasive wheel, non-hubbed)
- Kickback Brake engages when a pinch, stall, or bind-up event is sensed and the electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the grinder, and shut the grinder off
- E-CLUTCH® activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor
- Up to 30% more power vs the DCG414 Grinder
-
Free Shipping
$227.99Features
- The Makita XBU07Z18V; 3-tools-in-1: blower, vacuum and mulcher for convenient clean-up
- Makita XBU07Z18V easily converts from blower to vacuum mulcher
- 10:1 mulch ratio reduces up to 10 bags of leaves down to 1 bag with shredding blade
- Makita-built brushless motor delivers up to 148 CFM and 143 MPH of blowing force
- Brushless motor delivers up to 215 CFM and 13″ water lift of suction power
-
Free Shipping
$741.99Features
- Makita AC001GM1 Drives up to 700 finish nails using a fully charged 40V XGT® 4.0Ah battery
- Quiet Series designed with low noise emission at only 68 dB; ideal for indoor use
- Lightest weight cordless compressor in its class; up to 10 lbs. lighter*
- Up to 20% faster refill time from empty to full*
- Drives up to 1,400 finish nails using a fully charged 40V XGT® 8.0Ah battery (8.0Ah battery not included)
-
Special Order Shipping
$262.48Dewalt DCB406 40 V MAX Lithium Ion 6.0 Ah Battery The 40 V MAX Lithium Ion 6.0 Ah Battery 40V MAX* 6.0Ah premium battery provides 240 watt hours of energy (50% more capacity than the 4.0Ah battery) to deliver long runtime. All DEWALT 40V MAX* batteries are compatible with DEWALT 40V MAX* Outdoor Power Equipment.
-
SALE 24% OFF
Special Order Shipping
$160.99 Original price was: $160.99.$121.97Current price is: $121.97.Features
- IP 54 Rated
- Powerful Upgraded Motor to Provide Up To 650 CFM
- Multiple hanging options – freestanding, hang hooks, and wall mount
- Wide-Range, Variable Speed Control
- Up to 4.5 Hours runtime on MAX airspeed (using a DEWALT 5.0Ah Battery)
-
-
Free Shipping
$158.99Features
- Compact size ideal for precision trimming and edging
- 2-tools-in-1: 180º rotating head allows the trimmer to convert to edger
- Telescoping shaft (48-1/4” to 56-1/2”) for optimum cutting position
- Adjustable 5-position pivoting head for cutting angle adjustment when trimming in tight spaces
- Makita-built motor delivers 7,800 RPM for faster cutting
-
Special Order Shipping
$448.99Features
- The Dewalt DCF403D1 features a brushless motor delivers up to 2,100 lb of pulling force for fastening rivets, including those made of stainless steel
- 800 RIVETS PER CHARGE** to maximize productivity on the jobsite
- DESIGNED FOR EASE OF USE with tool-free nose change and on-board nose piece storage
- COMPATIBLE WITH MUTIPLE SIZE RIVETS including 3/32″, 1/8″, 5/32″, and 3/16″ rivets
- CAPABLE OF PULLING aluminum, steel, and stainless steel blind rivets
-
Free Shipping
$600.99Features
- Makita-built brushless motor along with 40V max XGT® battery combine to deliver powerful grinding and up to 60% faster cutting speed than predecessor models
- X-LOCK quick change system allows for tool-free wheel changes with simple snap-on mounting and pull release lever for change-out
- Electronic current limiter helps protect the motor from overload in high torque application
- Variable speed control dial allows for RPM adjustment (3,000-8,500) to match the speed to the application
- Auto-start Wireless System (AWS®) utilizes Bluetooth® technology for wireless power-on/off communication between tool and dust extractor (AWS® Transmitter sold separately)
-
Special Order Shipping
$1,327.06Features
- 19.4 Joules of impact energy for fast drilling and chipping, even in the hardest concrete.
- Anti-Rotation E-CLUTCH System shuts down the tool in bind up situations.
- Constant speed electronics allows the tool to maintain speed under load
- The SHOCKS Active Vibration Control System reduces vibration felt by the user at the handles, compared to rotary hammers without this feature.
- The heavy weight design makes it ideally suited for horizontal and downward drilling for #9 – #14 rebar dowel applications and dry coring up to 6 in.
-
Special Order Shipping
$1,008.99Features
- 6.1 Joules of impact energy for fast drilling and chipping, even in the hardest concrete.
- Anti-Rotation E-CLUTCH ® System shuts down the tool in bind up situations.
- Constant speed electronics allows the tool to maintain speed under load.
- System reduces vibration felt by the user at the handles, compared to rotary hammers without thsis feature.
- The light weight design makes it ideally suited for horizontal drilling for #3 – #6 rebar dowel applications and dry coring up to 3 in.
-
Free Shipping
$1,516.99Features
- Dewalt DCH775X2 offers rapid drilling and chipping in hard concrete with 19.4 J of impact energy
- Maintain speed under heavy loads with constant speed electronics
- Efficient performance and runtime with brushless motor and German-engineered apparatus
- Pro-grade versatility: Tackle horizontal and downward drilling for #9 – #14 rebar dowel applications, dry coring up to 6 in., chipping in any lower wall and floor, bushing, and ground rod driving
- Reduced vibration for comfortable grip Active Vibration Control
-
Free Shipping
$478.99Features
- Drives up to 700 finish nails using a fully charged 40V XGT® 4.0Ah battery (battery not included)
- Quiet Series designed with low noise emission at only 68 dB; ideal for indoor use
- Lightest weight cordless compressor in its class; up to 10 lbs. lighter*
- Up to 20% faster refill time from empty to full*
- Drives up to 1,400 finish nails using a fully charged 40V XGT® 8.0Ah battery (battery not included)
-
SALE 19% OFF
Standard Shipping
$212.99 Original price was: $212.99.$172.53Current price is: $172.53.Features
- Makita GFD02Z-built brushless motor delivers 585 in.lbs. of Max Torque
- The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
- XPT is engineered to provide increased dust and water resistance in harsh job site conditions
- 2 speed settings (0-550 & 0-2,200 RPM)
- Compact length at only 6-11/16″; ideal for working in tight spaces
-
Special Order Shipping
$192.99Features
- Powerful motor delivers up to 740 CFM on high setting
- Three speed settings (High/Medium/Low) and Oscillation selector for optimal air velocity and control
- Designed for reduced wind noise level for quiet operation at only 52 dB
- Oscillates 45º right and left
- Up to 14 hours of continuous run time in Low speed with 18V LXT® 6.0Ah Battery BL1860B (battery not included)
-
Special Order Shipping
$201.99Features
- Powerful motor delivers up to 740 CFM on high setting
- Three speed settings (High/Medium/Low) and Oscillation selector for optimal air velocity and control
- Automatically oscillates 45º right and left
- Manually tilts 90º up and 45º down for convenient redirection of airflow
- 3-stage automatic timer with 1, 2, and 4 hour power-off selection
-
Free Shipping
$474.99Features
- 18V LXT® Lithium-Ion battery provides up to 20 minutes of continuous run time
- Variable speed control dial (6,000-20,000 OPM) enables user to match the speed to the application
- 3.2° oscillation angle engineered for faster, more aggressive cutting and sanding
- Large on/off slide switch with lock-on button for operator convenience
- Includes adapters to fit most competitive accessories
-
Special Order Shipping
$288.61
- This item has been DISCONTINUED. – SEE DCS367P1 FOR UPDATED MODEL
-
Special Order Shipping
$457.99Features
- Dewalt DCF620CM2 features a slim nose and removable shoe which allows for easy access into tight corners.
- Screw gun lock-on feature enables fast installation of collated drywall screws
- Full 360° rotation on screw gun allows users to choose best positioning for application
- Tool-free screw length adjustment with detent marks allow for easy and clear setup for varying screw lengths
- Tool-free fine-depth adjustment allows for consistent screw installation at varying depths
