Showing all 20 resultsSorted by popularity
-
-
[Pack of 100] DeWalt PFM1411020 1/4″ x 1-3/4″ Screw-Bolt+ Concrete Screw Anchor, Hex Washer Head, Zinc
$29.95Features
- PFM1411020 is designed for standard ANSI tolerance drill bits
- Patented thread design offers low installation torque
- Tough threads for tapping high strength concrete
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to the edge than traditional expansion anchors
-
[Pack of 50] DeWalt PFM1411380 1/2″ x 3″ Screw-Bolt+ Concrete Screw Anchor, Hex Washer Head, Zinc
$39.46Features
- PFM1411380 is designed for standard ANSI tolerance drill bits
- Patented thread design offers low installation torque
- Tough threads for tapping high strength concrete
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to the edge than traditional expansion anchors
-
[Pack of 100] DeWalt PFM1411100 1/4″ x 3″ Screw-Bolt+ Concrete Screw Anchor, Hex Washer Head, Zinc
$39.90Features
- PFM1411100 is designed for standard ANSI tolerance drill bits
- Patented thread design offers low installation torque
- Tough threads for tapping high strength concrete
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to the edge than traditional expansion anchors
-
[Pack of 100] DeWalt PFM1411060 1/4″ x 2-1/4″ Screw-Bolt+ Concrete Screw Anchor, Hex Washer Head, Zinc
$28.95Features
- PFM1411060 is designed for standard ANSI tolerance drill bits
- Patented thread design offers low installation torque
- Tough threads for tapping high strength concrete
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to the edge than traditional expansion anchors
-
XUC06Z 36V (18V X2) LXT Brushless Material Handling, Flat Bucket
$7,141.99Features
- The Makita XUC06Z Delivers up to 100 minutes of run time (distance equivalent to 4.5 miles) under load using four 18V LXT® 6.0Ah BL1860 battery (battery not included)
- Holds (4) 18V LXT® Lithium-Ion batteries but operates using (2) 18V batteries at a time; utilizes additional batteries when needed (batteries not included)
- 3 forward speeds and one reverse with variable speed control by switch trigger in each range
- 295L heaped capacity with maximum load over 660 lbs
- Bucket equipped with a capped nozzle for draining liquid
-
XUC04Z 36V (18V X2) LXT Brushless Material Handling, Dump Bucket
$7,571.99Features
- Makita XUC04Z Delivers up to 100 minutes of run time (distance equivalent to 4.5 miles) under load using four 18V LXT® 6.0Ah BL1860 battery (battery not included)
- Holds (4) 18V LXT® Lithium-Ion batteries but operates using (2) 18V batteries at a time; utilizes additional batteries when needed (batteries not included)
- 3 forward speeds and one reverse with variable speed control by switch trigger in each range
- 200L heaped capacity with maximum load over 660 lbs
- Hand lever-operated mechanical axle disc brake plus electromagnetic brake (motor)
-
[12 Pack] DEWALT DPG855 Hi-Vis HPPE Fiberglass Cut Glove
$6.25Features
- 13 Gauge High Visibility HPPE Shell
- Reinforced Thumb Saddle
- Seamless Knit for Comfort
- Foam Nitrile Palm is Oil and Water Resistant
- Tested to EN 388 standards for Abrasion Resistance, Coup Test/Cut, Tear, Puncture and TDM-100 Test ( 4 X 4 2 D )
Select Options This product has multiple variants. The options may be chosen on the product page -
[3 Pack] DEWALT DPG70 Textured Rubber Coated Gripper Glove
$12.99Features
- Textured Palm
- Breathable Knit Back
- Seamless Fit
-
[Pack of 12] DEWALT DPG70 Textured Rubber Coated Gripper Glove
$3.67Features
- Textured Palm
- Breathable Knit back
- Ergonomically Designed for Superior fit and feel
- Seamless Fit
Select Options This product has multiple variants. The options may be chosen on the product page -
PIP 57-8653R Neoprene Coated Glove with Foam Insulated Liner and Etched Rough Finish – 18″ [1 pair]
$22.89Features:
- Neoprene gloves provide superior protection from a wide range of chemicals such as acids, caustics, solvents and oils
- Multi-dip process provides fully liquid-proof protection
- Etched rough finish has excellent non-slip grip and cut resistance
- Foam lined provides superior protection in cold and heat applications
- Gauntlet cuff for added forearm protection
- Black color hides dirt
- Complies with FDA food handling requirements 21 CFR, Part 177
Select Options This product has multiple variants. The options may be chosen on the product page -
Assurance 52-3665 Unsupported Neoprene, Flock Lined with Raised Diamond Grip – 28 Mil [1 dozen]
$44.29Features:
- Neoprene gloves provide superior protection from a wide range of chemicals such as acids, caustics, solvents and oils
- Straight cuff adds additional length to protect the forearm from liquid run-off
- Flock lining provides increased comfort and ease of donning
- Raised Diamond pattern for an enhanced grip
- Made from component materials that comply with Federal regulations for food contact 21 CFR, 170-199
Select Options This product has multiple variants. The options may be chosen on the product page -
Boss 1UB0025R 14″ Long 25 Mil Butyl Rubber Glove with Rough-Grip [1 pair]
$81.09Features:
- 25 Mil Butyl Rubber
- 14″ Long
- Rough-Grip
- Ergonomic Hand Design
- Easy To Decontaminate
- Excellent Holdout
- Protects Against Hazardous Chemicals And Materials
- Made In The USA
Select Options This product has multiple variants. The options may be chosen on the product page -
Boss 1UB0014R 14″ Long 14 Mil Butyl Rubber Glove with Rough-Grip [1 pair]
$47.89 – $51.89Features:
- 14 Mil Butyl Rubber
- 14″ Long
- Rough-Grip
- Ergonomic Hand Design
- Easy To Decontaminate
- Excellent Holdout
- Protects Against Hazardous Chemicals And Materials
- Made In The USA
Select Options This product has multiple variants. The options may be chosen on the product page -
Boss 1UB0014 14″ Long 14 Mil Butyl Rubber Glove with Smooth Grip [1 pair]
$40.49Features:
- 14 Mil Butyl Rubber
- 14″ Long
- Smooth
- Ergonomic Hand Design
- Easy To Decontaminate
- Excellent Holdout
- Protects Against Hazardous Chemicals And Materials
- Made In The USA
Select Options This product has multiple variants. The options may be chosen on the product page -
Boss 1UB0007R 14″ Long 7 Mil Butyl Rubber Glove with Rough-Grip [1 pair]
$40.49Features:
- 7 Mil Butyl Rubber
- 14″ Long
- Rough-Grip
- Ergonomic Hand Design
- Easy To Decontaminate
- Excellent Holdout
- Protects Against Hazardous Chemicals And Materials
- Made In The USA
Select Options This product has multiple variants. The options may be chosen on the product page -
Boss 1CN0034 Lightweight Neoprene Coating with Cotton Knit Lining and 11″ Long Pinked Cuff [1 pair]
$7.89Features:
- Lightweight Neoprene Coating
- Cotton Knit Lining
- Wet Grip
- 11″ Long Pinked Cuff
- Sanitized? Treated
Select Options This product has multiple variants. The options may be chosen on the product page -
PIP 57-8630R Neoprene Coated Glove with Interlock Liner and Etched Rough Finish – 12″ [1 dozen]
$150.79Features:
- Neoprene gloves provide superior protection from a wide range of chemicals such as acids, caustics, solvents and oils
- Multi-dip process provides fully liquid-proof protection
- Etched rough finish has excellent non-slip grip and cut resistance
- Gauntlet cuff for added forearm protection
- Black color hides dirt
-
Boss 1SN2539 18″ Long Heavyweight Neoprene with Flannel Lined and Crinkle Grip [1 pair]
$16.59Features:
- 18″ Long Heavyweight Neoprene
- Crinkle Grip
- Flannel Lined
- Sanitized? Treated
-
Boss 1SN2537 14″ Long Heavyweight Neoprene with Interlock Lined and Crinkle Grip [1 pair]
$12.39Features:
- 14″ Long Heavyweight Neoprene
- Crinkle Grip
- Interlock Lined
- Sanitized? Treated
